Toro Greensmaster 3300 Series Operator's Manual page 8

1
g014643
Figure 12
1. Cut-off bar
2. Insert a 0.060 inch feeler gauge between the top of
the reel and the bar and tighten the screws. Ensure
that the bar and reel are equal distance apart across
the complete reel.
Note: The bar is adjustable to compensate for
changes in turf conditions. The bar should be
adjusted closer to the reel when the turf is extremely
dry. By contrast, adjust the bar further away from
the reel when the turf conditions are wet. The bar
should be parallel to the reel to ensure optimum
performance and should be adjusted whenever the
reel is sharpened on a reel grinder.
8