Introduction; Features; Description; Applications - Beta Three TW Series User Manual

INTRODUCTION

TW10
Two Way10" Full Range Passive Speaker

Features

One 10" High Power LF Transducer.
One 34mm HF Driver.
Computer aided design to optimize frequency and
phase response.
Frequency Response 50Hz - 19kHz (-3dB).
Sensitivity 90dB, MAX. SPL 112dB/118dB(PEAK).
Rated Power 200W(RMS), 800W(PEAK).
Durable Polyurethane textured base paint.

Description

β3 TW10 is two way wide-dispersion full range speaker
which adopts the new structure and patented horn design.
It integrates one 10" woofer and one 34mm compression
driver. The voice coil in the woofer uses the round copper-
clad aluminium wire of inside and outside wrap technology,
the TIL backbone enhances the heat dissipation of the
voice coil and improves the power handling of the woofer
too. Symmetrical magnet circuit design reduces the odd-
order harmonic distortion to lower level. The 34mm flat
voice coil in the compression driver develops the magnetic
energy efficiently to both enhance the intensity of
the voice coil and increase the power handling. The rated
power reaches to 200W, Max. power reaches to 800W.
Cabinet is made of birch plywood with advanced
environmental protection Polyurethane-based painting
which is very rigid. The strength of cabinet itself reaches
to 4500N. Each suspension point can bare 3000N. Q235
grille with powder coating provides strong ultra weather
resistance, which can be used outdoors for 5 years.
TW Series Pro Loudspeaker System

Applications

Church
Auditorium
Conference room
Small performance
Multifunctional hall
TW10
3