Subscribe to Our Youtube Channel
Related Manuals for PESA PRO-HD2HDMI
Summary of Contents for PESA PRO-HD2HDMI
- Page 1 UIDE SD-SDI / HD-SDI / 3G-SDI HDMI C ONVERTER ONVERTING HIGH DEFINITION VIDEO TO HDMI ODEL PRO‐HD2HDMI ADE IN AWIAN www.pesa.com 81-9059-0708-0, Rev. A Phone: 256.726.9200 September 1, 2012...
- Page 2 © 2012 PESA, All Rights Reserved. Cougar is a trademark of PESA Switching Systems in the United States and/or other countries. Microsoft, Windows, and Windows NT are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
- Page 3 Do not install near any heat source. Only use attachments/accessories specified by the manufacturer. Clean only with dry cloth. Do not defeat the safety purpose of the polarized or grounding‐type plug. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the unit. SERVICE INFORMATION (QUALIFIED PERSONNEL ONLY): Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. Only use replacement parts recommended by PESA. After replacement/repair of this unit’s electrical components, conduct a resistance measurement between line and exposed parts to verify the exposed parts have not been connected to line circuitry. Proprietary Information of PESA...
- Page 4 09/1/2012 LIMITATION OF LIABILITY All information, illustrations, and specifications contained in this publication are based on the latest product information available at the time of publication approval. The right is reserved to make changes at any time without notice. DISCLAIMER OF WARRANTY IN NO EVENT SHALL PESA SWITCHING SYSTEMS, INC. BE LIABLE FOR ANY PARTY OR ANY PERSON, EXCEPT FOR CERTAIN WARRANY PROGRAM OFFERED BY THE LOCAL DEALER OF PESA, FOR THE CASES BUT NOT LIMITED TO THE BELOW: 1. ANY DAMAGE OR LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT, SPECIAL CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE PRODUCT. 2. PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OF NEGLIGENT OPERATION OF THE USER. 3. UNAUTHORIZED DISASSEMBLY, REPAIR OR MODIFICATION OF THE PRODUCT BY THE USER. 4. INCONVIENIENCE OR ANY LOSE ARISIING WHEN IMAGES ARE NOT DISPLAYED, DUE TO ANY REASON OR CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT. 5. ANY PROBLEM, CONSEQUENTIAL INCONVEINIENCE OR LOSS OR DAMAGE, ARISING OUT OF THE SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY. TRADEMARKS AND REGISTERED TRADEMARKS • MICROSOFT, WINDOWS, WINDOWS XP, WINDOWS 7, WINDOWS VISTA, WINDOWS EXPLORER ARE REGISTERED TRADEMARKS OF MICROSOFT CORPORATION IN THE U.S. AND/OR OTHER COUNTRIES • OTHER COMPANY NAMES AND PRODUCT NAMES APPEARING IN THIS DOCUMENT ARE REGISTERED TRADEMARKS OR TRADEMARKS OF THE COMPANY CONCERNED. Proprietary Information of PESA...
- Page 5 ORDER INFORMATION ‐ HDMI CONVERTER The PRO‐HD2HDMI SDI/3G‐HD‐SD to HDMI Converter provides a cost effective way to convert a 3G/HD/SD‐SDI signal to HDMI compliant format. The conversion between SDI and HDMI is pure digital and guarantees no loss transformation for both audio and video. Plus, with up to 8 channels audio support, 7.1 channel or 5.1 channel audio becomes available. The PRO‐HD2HDMI also provides a low jitter and re‐clocked outputs for daisy chain or multiple monitors. FEATURES • Supports 3G‐SDI formats(SMPTE 425M, Level A): 1080p @50/59.94/60Hz (4:2:2) • Supports high‐definition (HD‐SDI) formats: 1080i @50/59.94/60Hz, 720p @50/59.94/60Hz • Supports standard‐definition (SD‐SDI) formats: NTSC @59.94Hz, PAL @50Hz • Bit Rates for 2.97 Gbps, 2.967Gbps, 1.485 Gbps, 1.4835 Gbps, 270 Mbps • Auto 3G/HD/SD‐SDI detection • Support for HDMI Deep Color • Easy installation with wall mounting design • Supports up to 8 channels of audio, 7.1 or 5.1 optional • Low jitter • Re‐clocked outputs for looping SD/HD/3G SDI signals Part number Description PRO‐HD2HDMI Conversion module for SD‐SDI, HD‐SDI, and 3G‐SDI to HDMI Proprietary Information of PESA...
-
Page 6: Table Of Contents
PESA PRO‐HD2HDMI .................... 1‐3 IGURE OWER UPPLY ONNECTION 2‐1: PESA PRO‐HD2HDMI .................... 2‐1 IGURE YPICAL ODULE NSTALLATION 2‐2: PESA PRO‐HD2HDMI ................ 2‐2 IGURE ABLE ONNECTIONS AND AXIMUM ENGTHS Proprietary Information of PESA... -
Page 7: Description
PUB NO. 81905907080, Rev A 09/1/2012 PRO-HD2HDMI Chapter 1 BOUT YOUR PRODUCT 1.1 D ESCRIPTION PESA’s PRO‐HD2HDMI is a throw‐down style converter module allowing SD‐SDI, HD‐SDI, or 3G‐SDI video signals to be viewed on any HDMI display or monitor supporting 480i, 720p, 1080i and 1080p formats. Each module includes a power pack with a screw‐lock connector. The supplied power brick accepts a primary power input of 100‐240V, 50/60Hz, and supplies a +5V DC output. Power consumption is less than 3 watts. Each PRO‐HD2HDMI module accepts input signals through a standard 75 Ohm BNC connection. Source devices can be located up to 300m (1000ft) for SD‐SDI, up to 150m (500ft) for HD‐SDI, and 90m (300ft) for 3G‐SDI. Included on each module is a 75 Ohm BNC connector with input looping capabilities to allow local preview of the input source via a SMPTE type monitor or recording device. The compact package comes with two mounting tabs for easy attachment to wall or under‐the‐table locations. FIGURE 1‐1: PESA PRO‐HD2HDMI Module 1.2 C ONNECTING NPUTS Each PRO‐HD2HDMI allows one 75 Ohm input supporting SD/HD/3G inputs. Devices can be connected up to 300m (SD‐SDI), 150m (HD‐SDI), and 90m (3G‐SDI). FIGURE 1‐2 : PESA PRO‐HD2HDMI Input Connections Proprietary Information of PESA... -
Page 8: Onnecting Nputs
SD/HD/3G HDMI C ONVERTER ODULE PUB NO. 81905907080, Rev A 09/1/2012 1.3 C ONNECTING OOPING NPUTS Each PRO‐HD2HDMI allows one 75 Ohm looping connector supporting SD/HD/3G outputs. Devices can be connected to support preview monitoring, distribution to other devices in a chain, or to a matrix switch for alternative source distribution. FIGURE 1‐3 : PESA PRO‐HD2HDMI Looping Connections for Local Display Proprietary Information of PESA... -
Page 9: Connecting The Hdmi Output
SD/HD/3G HDMI C ONVERTER ODULE PUB NO. 81905907080, Rev A 09/1/2012 1.4 C HDMI ONNECTING THE OUTPUT Each PRO‐HD2HDMI allows one HDMI output per module. Devices such as HDMI LCD displays or projector can be connected for source monitoring from up to 300m away. FIGURE 1‐4: PESA PRO‐HD2HDMI Connection to HDMI Display 1.5 C PRO‐HD2HDMI ONNECTING POWER TO THE MODULE Connect the supplied power pack to the +5VDC connection on the module. Hand tighten the screw‐ lock to get a snug connection. DO NOT OVER TIGHTEN. FIGURE 1‐5: PESA PRO‐HD2HDMI Power Supply Connection Proprietary Information of PESA... -
Page 10: Chapter 2 Installing Your Pro-Hd2Hdmi
SD/HD/3G HDMI C ONVERTER ODULE PUB NO. 81905907080, Rev A 09/1/2012 Installing your PRO-HD2HDMI Chapter 2 With all input and output devices and power connected, the following diagram provides a typical full detail of module installation. There are no software or switch settings on this module. FIGURE 2‐1: PESA PRO‐HD2HDMI Typical Module Installation 2.1 S UPPORTED ESOLUTIONS 3G‐SDI INPUTS 1080p@ 50 / 59.94 / 60Hz SMPTE 424 / 425 (4:2:2) HD‐SDI INPUTS 720p @ 50Hz SMPTE 296 ‐3 720p @ 59.94 / 60Hz SMPTE 296 ‐1, ‐2 1080i @ 25Hz SMPTE 274 ‐6 1080i @ 29.97 / 30Hz SMPTE 274 ‐4, ‐5 1080p @ 23.98 / 24Hz SMPTE 274 ‐10, ‐11 1080p @ 25Hz ... -
Page 11: Cable Lengths Maximum Distances And Connection Type
SD/HD/3G HDMI C ONVERTER ODULE PUB NO. 81905907080, Rev A 09/1/2012 2.2 CABLE LENGTHS – MAXIMUM DISTANCES AND CONNECTION TYPE Defining the types of signals and connection styles FIGURE 2‐2: PESA PRO‐HD2HDMI Cable Connections and Maximum Lengths Proprietary Information of PESA... -
Page 12: Maintenance And Repair
Please consult our Customer Service Department before installing any parts not purchased from PESA. 3.5 F ACTORY ERVICE Before returning any equipment to PESA for service or repair, please contact our Customer Service Department for an RMA number. Proprietary Information of PESA... -
Page 13: Chapter 4 Specifications
Looping Connector Looping Connector Type BNC, 75 Ohm Looping Standard SMPTE 259, 292, 424 Looping Reclocking [3G‐SDI] up to 90m (300ft) [HD‐SDI] up to 150m (500ft) [SD‐SDI] up to 300m (1000ft) Audio Support Yes, embedded OUTPUTS Number of Outputs Connector Type HDMI, Type A (19 pin female) Standards HDMI 1.4 Cable connection distance ENVIRONMENTAL Housing Dimensions 79mm x 84mm x 27mm 3.1 x 3.3 x 1.2 inches Weight 250g (8.8 oz) Operational Temperature 0‐40 degree C Operational Humidity 20‐90% RH (non‐condensation) Power Connection +5VDC ( inter‐locking power plug) Power Consumption 3W (max) AC Power Brick 100‐240VAC, 50/60Hz Proprietary Information of PESA... -
Page 14: Chapter 5 Warranty
HDMI SD/HD/3G C ONVERTER ODULE PUB NO. 81905907090, Rev A 09/1/2012 Warranty Chapter 5 PESA Switching Systems, Inc., (PESA) warrants this equipment against defective workmanship or materials for a period of one (1) year from date of shipment. The sole warranty responsibility of PESA, shall be to replace or repair product proved to be defective. During the warranty period, defective parts will be replaced at no charge. Labor to repair or replace defective parts covered under the warranty will be performed at no charge at PESA. This warranty covers only products manufactured by PESA, and the components used in their manufacture. The warranty on assembled products sold by PESA., but manufactured by others shall be that of the original manufacturer. This warranty does not include shipping damage or damage caused by abuse, neglect, tampering by unauthorized personnel, damage inadvertently caused by the user, preventative maintenance, or any equipment or part thereof whose serial number has been removed or defaced. Neither the seller nor the manufacturer shall be liable for any injury, loss or damage, direct or consequential, arising out of the inability to use the product. Before using, user shall determine the suitability of the product for the intended use, and user assumes all risk and liability whatsoever in connection therewith. This warranty is effective only at the PESA factory in Huntsville, Alabama, USA. If possible, retain the original packing material for use in the unlikely event that your equipment must be returned to the PESA factory. When shipping your equipment, the shipping charges must be prepaid. The repaired unit will be returned to you, freight prepaid. This warranty is exclusive and in lieu of all other warranties, whether expressed or implied, including the implied warranties of merchantability and fitness for a particular purpose. Proprietary Information of PESA...
Need help?
Do you have a question about the PRO-HD2HDMI and is the answer not in the manual?
Questions and answers