Advertisement
Follow the Assembled Template for Leg Placement. The template for attaching the legs should be aligned
STEP 4a:
as shown below.
NOTE:
Edges of template
align with edges of table.
When T-base Leg is aligned with the template, Mark the four holes on Table top(A).
STEP 4b:
Step 5:
Attach the T-base Leg(B) to the Table Top(A)
using 8 Screws(D) per Leg.
IMPORTANT NOTICE
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
Check to be sure that you have a ll parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start to assemble.
Do not tighten all screws/bolts until completely assembled.
Keep all hardware parts out of reach of children.
Any problems or questions please call Regency Office Furniture at 1-866-816-9822
Leg #1
B
A
Leg #2
Advertisement
