Table of Contents
Advertisement
LCD Monitor Instructions
Adjustment Procedure
3
Select the item to be adjusted on the Main Menu
Select the item to be adjusted by moving the cursor on the Main menu with the
[
] and/or [
] button and then press the [ENTER] button. You can see the
cursor moving to the Sub menu.
4
Select the item to be adjusted on the Sub Menu
Select the item to be adjusted by moving the cursor on the Sub menu with the
[
] and/or [
] button and then press the [ENTER] button.
• The selected item turns blue and then it is possible to control the item.
picture
advanced
pip
(Ex.)
adv pip
options
utilities
Main menu
• To select another item on the Sub menu, press the [MENU] button.
5
Adjustment or Setting
For each item selected, the adjustment/setting has been made by pressing the
[
] and/or [
] button. This monitor saves adjusted value at intervals of about 5
seconds. Do not turn off the monitor for at the least 5 seconds after adjustment or
setting.
(The detail steps for each item are described in the page 18-49)
NOTE
In case that Composite Video, S-Video and Component Video cables are
connected, each adjustment procedure needs to be done for Composite Video,
S-Video and Component Video, separately.
17
25 -
+
brightness
50 -
contrast
+
H position
50 -
+
50 -
+
V position
15 -
phase
+
-
+
frequency
1056
scaling
Wide
Sub menu
Adjustment for computer screen
(Picture Menu)
Manual Adjustment
If you wish to adjust the screen finely or in case the result adjusted by Auto Adjust (see
page 33) sequence is not sufficient enough, adjust the screen manually.
A. Picture Menu
1
Adjust the brightness
1.
Select [picture] on the Main menu and press the [ENTER] button.
You can see the cursor moving to the Sub menu.
picture
advanced
pip
(Ex.)
adv pip
options
utilities
Main menu
2.
Select [brightness] on the Sub menu and press the [ENTER] button.
The selected item of [brightness] turns blue.
3.
Use the [
] and/or [
] button to adjust. (Interval: 0~100)
By pressing the [
] button, the whole screen is brighter.
By pressing the [
] button, the whole screen is darker.
2
Adjust the contrast
1.
Select [picture] on the Main menu and press the [ENTER] button.
You can see the cursor moving to the Sub menu.
picture
advanced
pip
(Ex.)
adv pip
options
utilities
Main menu
25 -
+
brightness
50 -
+
contrast
50 -
+
H position
50 -
+
V position
15 -
+
phase
-
+
frequency
1056
scaling
Wide
Sub menu
25 -
+
brightness
50 -
+
contrast
H position
50 -
+
50 -
+
V position
-
phase
15
+
-
+
frequency
1056
scaling
Wide
Sub menu
18
Advertisement
Table of Contents
