Service Function; Checking The Code Version - Samsung S19A100N Service Manual

4-5-2. Service Function

Checking the Code Version

„
1. Enter the service mode, and check the MCU code version and checksum.
2. Entering the Service Mode
Adjust the brightness and contrast ratio to 0.
-
Press and hold the Enter button for about 5 seconds.
-
The SVC Function screen will be displayed.
-
To close SVC Function, turn the power off.
-
3. Safe Mode
If the input signal is higher than the frequency supported by the product, the safe mode will turn the graphics card
-
setting to recommended mode for about 1 minute.
Service Function
Monitor On Time :
Panel Ch. No. :
On Time :
Cycle
Auto Auto
Pixelshift
Country
Scaler-MCU
Version : m-S119N0GFa-0900.0
Checksun : FE95
0 Hr
0
0 Hr
: 10
: On
: Off
: English
: Novatek NT68650
Panel Information
Select the Auto option
Select the PixelShift option.
Country
Scaler Vender
Micom Version
Micom Checksum
4. Troubleshooting
4-9