Service Function - Samsung Odyssey G7 LC27G7 T Series Service Manual

Troubleshooting

4-4-2. Service Function

„ Checking the Code Version
1. Input SVC mode and check the MCU code version and checksum.
2. Enter SVC mode.
- Set the Brightness and Contrast ratio to '0'.
- Press and hold the Enter button for 5 seconds.
- SVC Function OSD is displayed.
- Turn off the power to end SVC function.
3. Safe Mode
- When the input signal is higher than the supported frequency of the product, safe mode gives users some time
(one minute) to change the video card settings to the Recommended Mode settings.
Service Function
Monitor On Time
Panel Ch. No.
On Time
Cycle
Pixelshift
Country
HotPlug Time
Power Off
Scaler-MCU
Version : M-F7724CCAA-XXXX.X
Checksun : 13AF
4-12
: X Hr
: 0
: X Hr
: X
: Off
: English
: 0
: MSTAR MST9804
← Panel information
← Select the PixelShift option.
← Country
← Counting equipment dealers
← Micom version
← Micom checksum