Beep Symptoms - Lenovo ThinkPad S5 2nd Generation Hardware Maintenance Manual

Hide thumbs Also See for ThinkPad S5 2nd Generation:
Table of Contents

Advertisement

Table 3. Error messages (continued)
Symptom or error (beeps, if any)
The battery installed is not supported by this system and
will not charge.
Please replace the battery with the correct Lenovo battery
for this system.
Press the ESC key to continue.
This system does not support batteries that are not
genuine Lenovo-made or authorized. The system will
continue to boot, but may not charge unauthorized
batteries.
Attention: Lenovo has no responsibility for the
performance or safety of unauthorized batteries, and
provides no warranties for failures or damage arising out
of their use.

Beep symptoms

Lenovo SmartBeep technology enables you to decode beep errors with your smartphone when a black
screen occurs with beeps from your computer. To decode the beep error with Lenovo SmartBeep
technology, do the following:
1. Go to
http://www.support.lenovo.com/smartbeep
2. Download the proper diagnostic app and install it on your smartphone.
3. Run the diagnostic app and place the smartphone near the computer.
4. Press the Fn key on your computer to emit the beep again. The diagnostic app decodes the beep error
and shows possible solutions on the smartphone.
The following section describes some beep errors and the corresponding solutions.
Note: Do not attempt to service a product yourself unless instructed to do so by the Customer Support
Center or product documentation. Only use a Lenovo-authorized service provider to repair your product.
38
Hardware Maintenance Manual
FRU or action, in sequence
Replace the battery.
Replace the battery.
or scan the following QR Code.

Advertisement

Table of Contents
loading

Table of Contents