Makita M1902 Technical Information page 15

5-4-2 Assembling
[1] Assemble Foot to Main frame complete. (5-5-2 Assembling)
Fig. 5-4-2-1
[2] Align the height of Base and Front base by turning
Knob 44.
Knob 44
Front base
5-5 Foot
5-5-1 Disassembling
Remove Foot. (5-4-1 Disassembling)
5-5-2 Assembling
Fig. 5-5-2-1
[1] Assemble Torsion spring 7 to Foot.
Foot
Torsion
spring 7
[3] Align the "0" on the scale label on Knob 44 with the
Base
Note: If any of Front base, Base, Main frame complete,
[2] Hook the one leg of Torsion spring 7 to Base.
15 / 19
Fig. 5-4-2-2
triangle mark on Main frame complete, and replace the
scale label with a new one,
Knob 44 is replaced, replace the scale label of Knob
44 with a new one because the indication of the
cutting depth may be misaligned.
Triangle mark
Scale label
Fig. 5-5-2-2
Torsion
spring 7
Foot
Knob 44
Base