Advertisement
BULB REPLACEMENT
Replacing the Natural Spectrum
1.
Unplug the power cord from the electrical receptacle.
2.
Remove three Philips screws from the sides and
bottom of the 10X magnifi cation side of the mirror.
3.
While mirror is lying on its side, carefully remove the
mirror panel and lay it over to expose the bulb and
wire.
4.
Carefully detach the plug from the 4-prong bulb
connector.
5.
Undo the plastic tie holding the bulb connector plug
in place.
6.
Pull up on the bulb to release it from the 3 clips
holding it in place and dispose of the old bulb in
accordance with local and federal requirements.
7.
Place new bulb in clips, re-connect power cord,
re-tie plastic tie holding the bulb connector plug in
place, replace 10X mirror panel, and replace the
3 screws.
Open Magnifi ed (10x)
Side for bulb replacement
®
Important:
4
bulb:
Advertisement
