Cleaning And Disinfecting - Avalue Technology HID-2432 User Manual

HID-2432 User Manual

2.3 Cleaning and Disinfecting

During normal use of HID-2432, the device may become dirty and should be
regularly cleaned.
Cleaning Instructions
1. Turn off the computer before starting clean up. This way, you can see any
dirt on the screen; the brightness of the monitor may make you miss some
areas.
2. Wet a soft, lint-free or microfiber cloth with cleaning agent per
manufacturer's instructions or hospital protocol. Wipe the medical PC in a
gentle motion to remove dust, oil, or fingerprint smudges.
3. Wipe any moisture excess with a dry lint-free cloth to finish cleaning before
turning the computer back on.
Cleaning Tools
Below is a list of some items that may be needed or used when cleaning the
medical PC or medical PC peripherals.
Please keep in mind that some components in medical PC components may
only be cleaned using a product designed for cleaning that component.
Cleaning agent list: chemical disinfectants which have been tested on the
medical PC
No. Cleaning agent
1. Water
2. Alcohol
3. Alcohol 75%
Caution!

Do not immerse or rinse the HID-2432 or its peripherals. If you
accidentally spill liquid on the device, disconnect the unit from the
power source. Contact your Biomed Department regarding the
continued safety of the unit before placing it back in operation.

Do not spray cleaning agent on the chassis.

Do not use disinfectants that contain phenol. Do not autoclave or clean the
HID-2432 or its peripherals with strong aromatic, chlorinated, ketone, ether, or
Esther solvents, sharp tools or abrasives. Never immerse electrical connectors in
water or other liquids.
HID-2432 Quick Reference Guide
25