Avalue Technology HID-2432 User Manual page 24

HID-2432 User Manual
Please follow below steps to connect power cable to system.
The HID-2432 could only be powered by a DC power adapter (Delta
MDS-090AAS24F). Be sure to always handle the power cords by holding the
plug ends only.
Follow these procedures in order:
1. Connect the female end of the power adapter to the DC jack of the panel
PC.
2. Connect the female end of the power cord to the DC power adapter.
3. Connect the 3-pin male plug of the power cord to an electrical outlet.
External equipment intended for connection to signal input/output or other
connectors, shall comply with relevant UL standards (e.g. UL 60950-1 for IT
equipment and ANSI/AAMI ES60601-1/ IEC 60601-1 series for medical electrical
equipment
HID-2432 Quick Reference Guide
24