Extraction Operations - Kia NIRO Emergency Rescue Manual

Extraction Operations

The Niro is an Eco-electric model (HEV/PHEV). Because of the high voltage components
contained therein, first responders should pay special attention when they extract occupants
in the car. Before extraction operations, the first responders should "Identify, Immobilize and
Disable" the vehicle as discussed in sections on page 12-17.
Vehicle Stabilization
Use standard stabilization (lifting) points, as
shown beside. Always be sure to connect to
a structural member of the vehicle and
avoid placing jacks and lifting devices under
high voltage cables, fuel lines and other
areas not normally considered acceptable.
Extraction tools and procedure
When responding to an incident involving a Niro, we recommend that the first responders
follow their organization's standard operating procedures for assessing and dealing with
vehicle emergencies.
When the first responders cut the vehicle, they should always pay special attention to the
airbag system, orange colored high voltage cables and other high voltage components so that
the parts are not damaged, causing risks of explosion.
Location of ultra-high strength steel
In the image, high strength steel is
used in the areas colored in blue and
ultra-high strength steel is used in the
red colored areas. Depending on the
tools used, ultra high strength steel
can be challenging or impossible to
cut.
Emergency Procedures
Mild steel
High strength steel
Ultra-high strength steel
18