Kia NIRO Emergency Rescue Manual page 16

Disable
After the vehicle is secured to prevent movement, the final step in the initial response
process is to disable the vehicle, its SRS components and the high voltage electrical system.
To prevent current flow through the system, use one of the following procedures to disable
the vehicle.
I . Disabling the System – Smart Key System and "POWER" START/STOP Button
1. Confirm the status of the READY light on
the instrument panel. If the
light is illuminated, the vehicle is on.
a) If the READY light is NOT
illuminated, the vehicle is off. Do not
push the "POWER" START/STOP
button because the vehicle may start.
b) To turn off the system, put the shift lever in the P (Park) position and press the
POWER button.
Without depressing the brake pedal
Pressing
POWER button
One time
Two times
Three times
While depressing the brake pedal while a shift lever is in the P (Park) position
Pressing
POWER button
One time
Emergency Procedures
READY
POWER button
LED color
Off
Amber
Reddish orange
Off
POWER button
LED color
Off
Off
"POWER" START/STOP Button
Vehicle condition
Off
Electrical accessories are
operational.
The warning lights can be checked
before the vehicle is started.
Off
Vehicle condition
Off
Ready to drive
14