Emergency Procedures
16
II. Disabling the System – IG (Ignition) Fuse Removal
1. Open the hood.
2. Remove the engine room fuse box
cover.
3. If necessary, lower the windows,
unlock the doors and open the tail gate
as required, before disconnecting the
12V battery (located in cargo area on
Engine room fuse box
passenger side). Once the 12V battery
is disconnected, power controls will not
operate.
4. In the event the vehicle may not
be disabled using the "Power"
START/STOP Button, pull the IG1,
IG2 Fuse from the engine room fuse
box. If the IG Relay cannot be
located, pull out all the fuses and
relays in the fuse box.