Disable The Scene; Reset Network Configuration; Reset User Preferences; Factory Reset - keemple KP-GW-01 User Manual

2. Choose the scene you want to delete and tap the button
3. From the drop down menu select option Delete
4. Confirm deletion

7.5. DISABLE THE SCENE

Please follow next steps in order to disable the scene:
Select Scenes option in the application's main menu
1.
2. Choose the scene you want to disable and tap the toggle switch button in the
upper left corner

8. RESET NETWORK CONFIGURATION

In order to reset the network connection settings to factory defaults, please follow next
steps:
1. Press back button 3 times
2. During the operation, the LED will blink red 5 times per second
Reset of network connection settings is followed by reset of the gateway device. If Ethernet
cable is connected to the gateway during boot process, gateway will automatically connect
to the home network router via Ethernet cable. Otherwise, the gateway will start operating
in AP mode as explained in Section 3.1.

9. RESET USER PREFERENCES

This function allows user to reset all user settings (device information, network
configuration, scenes, etc.).
In order to reset user preferences, please follow next steps:
1. Press back button 6 times
2. During the operation, the LED will blink red 2 times per second

10. FACTORY RESET

In order to restore your gateway to default factory setting, please follow next step:
1. Press back button 9 times
2. During the operation, the LED will blink red once per second
21