keemple KP-GW-01 User Manual page 18

To add a new trigger (or triggers) to the scene, tap the "Add " button in the upper
3.
right corner and choose type of the trigger
4. In case you would like to create a device trigger (or triggers), please follow the next
steps:
a. In the device trigger dialog, choose the device you want to add as a trigger
b. In the drop-down list, choose functionality and its value
c. In case you would like to set device delay time, choose an option and tap the
"OK" button to add the trigger (Illustration 26)
5. In case you would like to create time trigger (or triggers), please follow the next
steps:
a. In the time trigger dialog, choose the time when the scene should be active
(Illustration 27)
b. Choose the schedule for the scene. In case of one-time event, set the desired
date. In case the event should repeat, choose the Weekly option and the days
when the scene should occur.
Tap the "OK" button to add the trigger
c.
Illustration 27 : Trigger selection
6. Repeat steps 3 to 5 and use logical operators AND/OR (upper right corner) to
combine multiple triggers (e.g. we would like to define an action "when light
intensity is less than 20 AND motion is detected")
7. Once you have set all triggers, tap the button
8. In the new dialog, you will be able to set the status (or statuses) at which the scene
will be active. The status can be added by pressing "Add" button in the upper right
corner (Illustration 28). If you do not define any status, the scene will be active at
all statuses
Illustration 28 : Status selection
Illustration 26 : Scene schedule
to go to the next step
18