Mocka Jenson Assembly Instructions

Jenson High Chair
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
FOLLOW THE MANUFACTURERS INSTRUCTIONS
DO NOT LEAVE CHILDREN UNATTENDED
THE HARNESS MUST ALWAYS BE USED AND CORRECTLY
FITTED – MOST INJURIES FROM HIGH CHAIRS ARE CAUSED
BY FALLS
POSITION THE HIGH CHAIR AWAY FROM SOLID STRUCTURES
AND BENCHES TO AVOID INJURIES CAUSED BY FALLS AND
BY ACCESS TO DANGEROUS ITEMS
Falling hazard: Prevent your child from climbing on the product.

Do not use the product unless all components are correctly fitted and

adjusted.
Be aware of the risk of open fires and other sources of strong heat in the

vicinity of the product.
Be aware of the risk of tilting when your child can push its feet against a table

or any other structure.
Do not carry backrest or adjust height when baby is inside of chair.

Do not use the product until the child can sit up unaided.

Do not to use the product if any part is broken, torn or missing.

Any additional harness other than the one provided by the manufacturer, shall

comply with EN 13210.
Product is intended for children able to sit up unaided and up to 3 years or a

maximum weight of 15kg/ 35lbs
Always store the highchair so it cannot be pulled or fall on children.

Only use the high chair on a flat, even and horizontal floor and do not elevate

the high chair on any structure or table.
Position the high chair away from furniture, walls, hot surfaces and liquids,

window covering cords, and electrical cords and position the high chair away
from furniture when the chair is not being used at a table with the tray
removed.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
1