Download Print this page
Mocka Original Highchair Assembly Instructions Manual

Mocka Original Highchair Assembly Instructions Manual

Hide thumbs Also See for Original Highchair:

Advertisement

Quick Links

Original Highchair
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
IMPORTANT!
KEEP FOR FUTURE REFERENCE:
WARNING: Never leave your child unattended in the highchair. Strict
adult supervision is required at all times.
WARNING: Ensure the safety strap is in use at all times to avoid the child
slipping downwards and causing injury. We recommend the use of the
shoulder and waist harness at all times to avoid injury caused by falls.
WARNING: Do not use the highchair unless components are correctly
fitted and adjusted.
WARNING: Ensure the highchair is positioned away from objects or
structures that can cause injury. Be aware of the risk of open fire and
other sources of strong heat, such as electric bar fires, gas fires etc, in
the vicinity of the highchair.
WARNING: Ensure both the seat and footrest are locked into positon
and cannot be moved by hand, before placing the child in the highchair.
WARNING: For babies/toddlers under 2 years old, please ensure the
seat is positioned on the 1st or 2nd level from the top ONLY.
Do not tighten all screws until all components have been assembled.
The highchair should not be used until the child can sit up unaided.
Do not use the highchair if any part is broken, torn or missing.
Only use the highchair on a flat, even and horizontal floor.
Do not elevate the highchair on any structure or table.
mocka.co.nz | mocka.com.au
Tray
Seat board
Footboard
Metal rod
Backboard Upper
Safety strap
Highchair Leg
Support brace
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Original Highchair and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Mocka Original Highchair

  • Page 1 Original Highchair Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. IMPORTANT! KEEP FOR FUTURE REFERENCE: Backboard Upper WARNING: Never leave your child unattended in the highchair. Strict adult supervision is required at all times.
  • Page 2 Original Highchair Assembly Instructions The best way to clean your highchair – especially the tray is with a clean damp cloth, and then wipe completely dry. We recommend you DON’T use household cleaners as these could lift the varnish and upset the wood finish.
  • Page 3 Original Highchair Assembly Instructions To begin assembly, line up backboards, metal rods, and support brace between both legs of the highchair. Ensure all components slot into the corresponding grooves on the inside of the legs. Loosely fasten rods to the highchair legs using screws (A) and allen key provided.
  • Page 4 Original Highchair Assembly Instructions Note: It is important to ensure that the foot board is inserted at least three rungs below the top metal rod. Loosely fasten upper and lower backboards to legs Slide seat board and foot board into slots in the highchair legs using long screws (B) and bolt nuts (C).
  • Page 5 Original Highchair Jolt Wardrobe Assembly Instructions ASSEMBLY INSTRUCTIONS Remove any screws already in the ends of the tray, and From the back of the chair, fasten the tray through the then slide tray onto highchair leg supports. Make sure legs using the tray screws (E) and tray bolts (F) on each one set of holes in the tray line up with holes in the legs.
  • Page 6 Original Highchair Assembly Instructions IMPORTANT - To ensure the highchair is 100% safe for your child please read this important information. Start by working in a methodical manner by tightening the bottom left screw, then tightening the bottom right screw. Continue in this manner,...
  • Page 7 Original Highchair Assembly Instructions LEG EXTENDERS To attach the leg extenders, remove white Attach leg extender at the desired point using a plastic footpad. 15mm small screw (J) & screwdriver. All done! mocka.co.nz | mocka.com.au...
  • Page 8 Connect the rest of the harness to the anchor-straps supports and under the backrest. Tie to high-chair frame p i l by passing each clip through the loop in the straps. harness and middle buckle loose and open for now. mocka.co.nz | mocka.com.au...
  • Page 9 To take the child out of the chair, C. With the harness sitting over the shoulders, clip the front buckles simply unclip the buckle and slip o harness. All done! Enjoy! together as shown. mocka.co.nz | mocka.com.au...