Table of Contents
Advertisement
Quick Links
VZ-FE-1
ADVANTAGES
• Onvif 2.4 Profile S Compliant
• 1/1.8" SONY Progressive Scan CMOS Sensor
• 6 MP Fixed 1.6 mm HD Lens / De-warping Image (3600)
• H.264 High/Main/Baseline Profile
• 0.01 Lux ( Color-AGC On ), 0 Lux ( B/W - IR On )
• 6 IR LEDs, AGC, ATW, DNR (2D / 3D), D-WDR, ICR, HLC,
• Aluminum Alloy Body / IP66
MODEL #
CAMERA SPECIFICATION
Imaging Sensor
HD Scanning System
Min. Illumination
Lens
Electronic Shutter Speed
FOV (Field Of View)
Digital - WDR (Wide Dynamic Range)
2D / 3D - NR (Digital Noise Reduction)
IR LED / Range
Day & Night
Video Compression
Bit Rate (CBR/VBR)
Audio Compression
Max. Resolution
Stream
Stream#1
Stream #2
Image Setting
De-warping
HLC
INTERFACE
Ethernet
Audio I/O
Alarm I/O
Additional Storage
NETWORK
Network Protocols
Alarm Trigger
RTSP Video
Security
System Compatibility
WEIGHT & DIMENSIONS
Net Weight
GENERAL
Language
Construction
Power
- Supply
- Power Consumption
Regulation
Operating Humidity
Operating Temperature
Standard Protection Rating
D/N
VZ-FE-1
SONY 6 MP CMOS Sensor
1/1.8" Progressive Scan
0.01 Lux (Color, AGC On), 0 Lux (BW, IR On)
6MP 1.6mm
1/5sec ~ 1/20,000sec
3600
On, Off
On, Off
6pcs IR LED / 49 ft ( 10m )
ICR ( Auto, B.W, Color )
IMAGE
H.264 High/Main/Baseline Profile, M-JPEG
500kb - 12000kb
G.711 ,RAW PCM
3072 x 2048 @15fps
3072 x 2048 @15fps
1920x1920/1440x1440/1920x1080@25/30fps
1280x1280/720x720/740x576@15/25/30fps
Rotate Mode, Saturation, Brightness
Contrast, Sharpness
1F + 3 / 5 / 7, 180 0 panorama
On, Off
1ea - Ethernet (10/100 Base-T) RJ-45 Connector
1ch Audio In, 1ch Audio Out
1ch Alarm In, 1ch Alarm Out
1ea - Micro SD/SDHC/SDXC slot, Max 64GB
HTTP,HTTPS, TCP/IP, UDP/IP, RTSP, DHCP, NTP
PPPoE, Unicast and Multicast
Network disconnect, Disk alarm, I/O alarm
Standard RFC2326, Support QuickTime / VLC
User Sec. Authentication, Reset, H/W WatchDog
Onvif 2.4 Profile-S
ɸ6.37" x 2.05" / ɸ161.99mm x 52.2mm
1.54 lbs / 700g
English (Selectable)
Aluminum Alloy
AC24V / DC12V / PoE
8W - IR LED ON | 5W - IR LED OFF
CE, FCC
0% to 90%
-22 - 140°F / -30°C - 60°C
IP 66
VZ-FE-1
Cable Connection
1. Gray Core : Alarm output A ( Normal Open )
2. 12V DC In
3. Audio Out
4. Audio In
5. RJ-45 (TCP/IP)
q
w
e
r
t
Contact ViewZ
• Address : 177 W. Orangethorpe Ave., Placentia, CA 92870
• Phone : (714) 996-1177, Fax : (714) 996-1138
• Sales : sales@viewzusa.com
• Specification subject to change without notice.
6MP
IP Fisheye Camera
M O T I O N
DETECTION
Purple Core : Alarm output B ( Normal Open )
Yellow Core : Alarm input positive terminal
Orange Core : Alarm input ground terminal
Advertisement
Table of Contents
Related Manuals for ViewZ VZ-FE-1
Summary of Contents for ViewZ VZ-FE-1
- Page 1 VZ-FE-1 IP Fisheye Camera VZ-FE-1 ADVANTAGES • Onvif 2.4 Profile S Compliant • 1/1.8” SONY Progressive Scan CMOS Sensor • 6 MP Fixed 1.6 mm HD Lens / De-warping Image (3600) • H.264 High/Main/Baseline Profile • 0.01 Lux ( Color-AGC On ), 0 Lux ( B/W - IR On ) • 6 IR LEDs, AGC, ATW, DNR (2D / 3D), D-WDR, ICR, HLC, • Aluminum Alloy Body / IP66 MODEL # VZ-FE-1 CAMERA SPECIFICATION Imaging Sensor SONY 6 MP CMOS Sensor HD Scanning System 1/1.8” Progressive Scan Min. Illumination 0.01 Lux (Color, AGC On), 0 Lux (BW, IR On)
- Page 2 VZ-FE-1 IP Fisheye Camera INSTALLATION PRECAUTIONS 1. Stick the Installation location sticker on the Installation surface, Drill Do not use the camera if fumes, smoke or a strange odor is emitted from four holes based on the marks on the sticker. Drive the swell plastic the unit, or if it seems to not function correctly. Disconnect the power source buttons into the holes. immediately and consult your supplier. 2. Take out the camera and remove the installation bracket, use screws with a length of 30mm to fix the installation bracket, as shown in Always follow the instructions in the installation guide when applying figure power. Fire and equipment damage can occur if power is applied 3. Connect the multi-connector cable. incorrectly. For the correct power supply, refer to the specification sheet. 4. Rotate and remove the cover, as shown in figure 5. Aim the four holes of the camera at the screw bolts, Fasten the Do not install or operate in small, unventilated areas. Heat build up can screws and fix the camera, as shown in figure significantly reduce the performance and operating life of the product and may 6. Aim the buckles of the cover at the class gap, push in and rotate the cause a fire. decoration until it can’t rotate, as shown in figure To prevent damage, do not drop the camera or subject it to strong shock or Attach the bracket Remove the cover vibration. Cover If installed close to a TV, radio transmitter, magnet, electric motor transformer or audio speakers the magnetic field generated may interfere with or distort the image. Installation Bracket Whether or not the camera is used outdoors, never point it toward the Attach the Camera Attach the Cover sun. Use caution when operating the camera in the vicinity of spot lights or other bright lights and light reflecting objects.
Need help?
Do you have a question about the VZ-FE-1 and is the answer not in the manual?
Questions and answers