Table of Contents
Advertisement
Quick Links
VZ-HDC-1
ADVANTAGES
• Full HD 1080p over coaxial cable, BNC connection
• Aluminum Die-Casting body
• True WDR, True Day and Night, Dual Voltage
• Panasonic 2.2 Megapixel CMOS Sensor
• 3.0 Megapixel DC Auto IRIS 2.8~11mm HD Lens
• 1920x1080p/30fps, HD-SDI(BNC) and 700TVL Analog (BNC)
• 0.5Lux (Color), 0.1Lux (B/W), 0.02Lux (Sens-up 30X)
• 30 IR LEDs, AGC, ATW, DNR (2D + 3D)
MODEL #
SPECIFICATION
Imaging Sensor
HD-SDI Scanning System
Analog Scanning System
Number of active pixels
Number of effective pixels
S/N Ratio
HD-SDI Video Output
Analog Video Output Level
Min. Illumination
Lens
Electronic Shutter Speed
White Balance
Backlight Compensation
Digital - WDR
AGC
Adjust
True Day & Night
2D/3D-NR
Digital Zoom
Privacy Masking
Motion Detection
Defect
Sens - up
D - EFFECT
IR LED
INTERFACE
HD-SDI – BNC
CVBS – BNC ( Yellow )
WEIGHT & DIMENSIONS
Dimensions
Net Weight
GENERAL
Language
Construction
Power
- Supplied Voltage
- Power Consumption
Regulation
Humidity
Operating Temperature
Storage Temperature
1080 HD-SDI | True WDR
VZ-HDC-1
Panasonic 1/3" 2.2 Megapixel Sensor
Progressive Scan
700 Lines 2:1 Interlace NTSC
1944 (H) x 1092 (V) = 2,122,848 (pixel)
2010 (H) x 1108 (V) = 2,227,080 (pixel)
More than 50dB (AGC OFF)
HD-SDI: 1920 X 1080
1.0 V-p-p 75 NTSC Standard
(Video 0.714 Vp-p Sync 0.286 Vp-p)
0.5Lux (Color), 0.1Lux (BW), 0.02Lux (Sens-up x30)
Megapixel HD DC Auto IRIS 2.8~11mm
Varifocal Lens, Aperture Ratio: 2.5
Auto, FLK, 1/60~1/100,000sec
AWB, AWC-SET, MANUAL, INDOOR, OUTDOOR, ATW
WDR, BLC, HSBLC, Off
On, Off
Adjustable 1 � 15
SHARPNESS, MONITOR, LSC, NTSC/PAL
Auto, B.W, Color, EXT
On, Off
On (x2 � x64) / Off
On (8 Zone Selectable) / Off
On (4 Zone Selectable) / Off
LIVE DPC / STATIC DPC
On (X2 � X30) / Off
Freeze / Mirror / D-Zoom / NEG.IMAGE
30 IR LEDs
1
1
Ø 6.22 x 4.17(H) inch ( Ø 155 x 106(H)mm )
2.2 lbs / Appx. 1,000g
English
Aluminum Die-Casting body
AC24 / DC12V ± 10%
Max. 420mA IR LEDs ON
CE, FCC, RoHS, KCE
0% to 90%
14 � 122°F / -10°C � 50°C
-4 � 140°F / -20°C � 60°C
VZ-HDC-1
IR Vandal Proof Dome Camera
DIMENSIONS
Ø 6.22"/ Ø 155 mm
Contact ViewZ
• Address : 177 W. Orangethorpe Ave., Placentia, CA 92870
• Phone : (714) 996-1177, Fax : (714) 996-1138
• Sales : sales@viewzusa.com
• Specification subject to change without notice.
3.89"/ 99 mm
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ViewZ VZ-HDC-1
Summary of Contents for ViewZ VZ-HDC-1
- Page 1 VZ-HDC-1 1080 HD-SDI | True WDR IR Vandal Proof Dome Camera VZ-HDC-1 ADVANTAGES • Full HD 1080p over coaxial cable, BNC connection • Aluminum Die-Casting body • True WDR, True Day and Night, Dual Voltage • Panasonic 2.2 Megapixel CMOS Sensor • 3.0 Megapixel DC Auto IRIS 2.8~11mm HD Lens • 1920x1080p/30fps, HD-SDI(BNC) and 700TVL Analog (BNC) • 0.5Lux (Color), 0.1Lux (B/W), 0.02Lux (Sens-up 30X) • 30 IR LEDs, AGC, ATW, DNR (2D + 3D) MODEL # VZ-HDC-1 SPECIFICATION Imaging Sensor Panasonic 1/3” 2.2 Megapixel Sensor...
-
Page 2: Regulatory Notice
VZ-HDC-1 1080 HD-SDI | True WDR IR Vandal Proof Dome Camera INSTALLATION PRECAUTIONS 1. Attach the camera base on the installation surface with the supplied screws. Do not use the camera if fumes, smoke or a strange odor is emitted from the unit, 2. Adjust the camera angle. or if it seems to not function correctly. Disconnect the power source immediately and consult your supplier. 3. Attach the dome cover to the camera body. 4. Connect the camera output to the DVR or to the monitor. 5. Connect the power source. Always follow the instructions in the installation guide when applying power. Fire and equipment damage can occur if power is applied incorrectly. For the correct power supply, refer to the specification sheet. Do not install or operate in small, unventilated areas. Heat build up can significantly reduce the performance and operating life of the product and may cause a fire. To prevent damage, do not drop the camera or subject it to strong shock or vibration. If installed close to a TV, radio transmitter, magnet, electric motor transformer or audio speakers the magnetic field generated may interfere with or distort the image. CAMERA ANGLE ADJUSTMENT Whether or not the camera is used outdoors, never point it toward the – Rotate the camera as necessary by turning the camera gimbal on the sun. Use caution when operating the camera in the vicinity of spot lights or base other bright lights and light reflecting objects.
Need help?
Do you have a question about the VZ-HDC-1 and is the answer not in the manual?
Questions and answers