Projection - PRODIM Proliner Quick Start Manual

5. Projection

The Proliner always measures in 3D.
To create a 2D template, the measured 3D points have to be projected on a projection plane.
The drawing above is an excessive example to help explain what the Proliner software actually does.
Below is a picture of a kitchen countertop. This top looks fairly flat, but is uneven in practice, thus 3D.
Therefore, you will always need to determine the 2D projection plane first.
The determined 2D projection plane used for measuring the countertop is shown in light blue.
Watch the video
PRODIM 2017 ©
3D measurement
2D template
Project plane
Proliner Quick start guide - Training preparation Page 9