Positioning - PRODIM Proliner Quick Start Manual

7. Positioning

When measuring, it is important to choose the ideal position for your Proliner.
Leveling is not necessary if you determine the projection plane yourself.
Stability:
Make sure the Proliner is placed in stable position, it should not be able to move during the measurement. The same
is applicable to the object that needs be measured.
Range:
Determine if you can reach all points to be measured. Pick a place where you can make the most of the Proliner
range. Try to avoid obstacles, so that you can keep the wire in a straight line during measurement.
TIP: Position the Proliner significantly higher as the measurement object!
If possible, try to place the Proliner clearly above the projection plane.
This way you get a drawing projected on the top of your projection plane.
If the projection plane is positioned higher than the Proliner, you are likely to mirror your measurement.
.
Watch the video
PRODIM 2017 © Proliner Quick start guide - Training preparation Page 11