Honda 2007 Acura RL User Manual page 82

2005-08 ACCESSORIES AND EQUIPMENT Navigation System - RL
Fig. 50: Screen Display - Map Type
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Compass type
Fig. 51: Screen Display - Compass Type
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Follow the steps below to prevent the screen from showing up in the future:
Hold down the buttons (Menu + Map/Guide + Cancel) for about 5 seconds (the "Select Diagnosis

items" screen appears).
Hold down the Map/Guide button for 5-10 seconds (a screen with a "Complete" button, appears).

Touch "Complete", and then the "Return" button (the system may re-boot).

Restart the vehicle, and confirm normal operation by completing the "TQI of the Navigation System"

Service Bulletin.
Navi System Link
This diagnostic tests the cables connecting the navigation components. Ensure that the ignition switch

is in the ON (II) position. When the diagnostic begins you hear a "bong" sound. The system is in a
"Detecting" mode, and is waiting for all items in white to be tested. This includes the navigation voice
control (TALK/BACK) buttons, and microphone. Press the navigation TALK button on the steering
wheel, and in a normal voice, say "testing." The Talk indicator on the screen should turn green, and
the voice level indicator should move to at least the 6th bar to pass. Next, press the navigation BACK
button. The "Cancel" indicator should turn green.
If all of the communication lines connecting the system components, and the navigation

TALK/BACK buttons/microphone check out OK (all block diagram items green), then the "OK"
indicator turns green.
If there is a problem with the system, the faulty system component item turns to red, and the screen

2007 Acura RL