Forest garden VENPAVNB Assembly Instructions

Advertisement

READ THE INSTRUCTIONS THOROUGHLY
BEFORE ASSEMBLING
This product is pressure
treated
to ensure longevity of all
timber components and to protect against rot. This may leave
a colour difference on some parts that will even out as the
moisture content stabilises This will not need additional
.
treatment.
Please keep all plastic bags and small parts away from
n
children.
The roof of this product is not a load bearing structure.
n
Timber is a natural material and will shrink and swell as a
n
result of varying moisture content.
Assembly of damaged parts may be deemed to be
acceptance and this may affect the remedies you are entitled
to.
If the product is not constructed in accordance with the
instructions, or is altered in anyway (e.g. painted), the
manufacturer cannot be held liable for any resulting damage.
Attention:
For Domestic Use Only.
n
Must be built on a
solid
and
level
n
base.
Make sure all screw heads are flush.
n
Regularly check that all fixings are
n
tight and secure.
Assembly of this product
Make sure all staples from
n
d.
packaging are remove
Important:
Please check all parts prior to
assembly.
x 2
Pozidrive
Screwdriver
Ladder
Spirit Level
Saw
Forest Garden Ltd. | Unit 288 | Oak Drive | Hartlebury Trading Estate | Hartlebury| Worcestershire | DY10 4JB
Item Number
Important:
requires a minimum of
two adults.
Pre-drill
for each screw used.
Fixing Pack (VENPAVNBFP)
a
Tape Measure
25mm SCREW Qty 320
d
Rubber Mallet
Part Code
1
1201202400PARPTR
3
OSCRAF
4
88880210FINPTR
5
150142695PARA2PTR
6
150142506PARA2PTR
7
150142318PARA2PTR
8
150142129PARA2PTR
9
150141941PARA2PTR
10
150141752PARA2PTR
11
150141564PARA2PTR
12
150141375PARA2PTR
13
150141187PARA2PTR
14
150140998PARA2PTR
15
150140810PARA2PTR
16
150140621PARA2PTR
17
150140433PARA2PTR
18
124140244PARA2PTR
19
120282456PARA2NIPTR
20
120481680PARNIIA2PTR
RAFTER 120x47.5x1680mm PAR NOTCHED TWICE ANGLED PTREAT
21
120282400PARNIIPT
22
120240146PAII45PT
23
90900658PAII45PT
b
50mm SCREW Qty 80
100mm SCREW Qty 4

PARTS LIST

PARTS LIST
Part Description
POST 120x120x2400mm PAR PTREAT
OUTDOOR STRUCTURE CORNER RAFTER
FINIAL 88x88x210mm PTREAT
BOARD 150x14x2695mm PAR ANGLED PTREAT
BOARD 150x14x2506mm PAR ANGLED PTREAT
BOARD 150x14x2318mm PAR ANGLED PTREAT
BOARD 150x14x2129mm PAR ANGLED PTREAT
BOARD 150x14x1941mm PAR ANGLED PTREAT
BOARD 150x14x1752mm PAR ANGLED PTREAT
BOARD 150x14x1564mm PAR ANGLED PTREAT
BOARD 150x14x1375mm PAR ANGLED PTREAT
BOARD 150x14x1187mm PAR ANGLED PTREAT
BOARD 150x14x998mm PAR ANGLED PTREAT
BOARD 150x14x810mm PAR ANGLED PTREAT
BOARD 150x14x621mm PAR ANGLED PTREAT
BOARD 150x14x433mm PAR ANGLED PTREAT
BOARD 124x14x244mm PAR ANGLED PTREAT
BOARD 120x28x2456mm PAR ANGLED NOTCHED PTREAT
BOARD 120x28x2400mm PAR NOTCHED
BOARD 120x24x145mm PAR ANGLED PTREAT
BRACE 90x90x658mm PAR ANGLED PTREAT
c
80mm SCREW Qty 20
e
150mm SCREW Qty 4
Quantity
4
4
1
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
16
8
Not to Scale
Issue 0117

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VENPAVNB and is the answer not in the manual?

Questions and answers

Summary of Contents for Forest garden VENPAVNB

  • Page 1 50mm SCREW Qty 80 80mm SCREW Qty 20 100mm SCREW Qty 4 150mm SCREW Qty 4 Spirit Level Rubber Mallet Forest Garden Ltd. | Unit 288 | Oak Drive | Hartlebury Trading Estate | Hartlebury| Worcestershire | DY10 4JB Issue 0117...
  • Page 2 Attention: 2220 Before you begin construction we recommend that you place all the parts in the order that you will use them. Read carefully through the steps of the instructions first. Fix the top outer ring of fascias so that they sit on the lip of the posts and all meet up at the ends.
  • Page 3 The internal ring is interlocking. Start by positioning and lining up the back and sides first. Fix the back section using 2x50mm screws at each end screwing into the posts. Using a rubber mallet gently tap the boards until the notches are locked.
  • Page 4 2 x 80mm screws and to the fascias using 1x50mm screw through each side. Again use a spirit level and adjust as required. Forest Garden Ltd. | Unit 288 | Oak Drive | Hartlebury Trading Estate | Hartlebury| Worcestershire | DY10 4JB Issue 0117...
  • Page 5 Hint: Use the smaller of the roof boards to line up the top step of the stepped rafter against the top step of the corner rafters. Starting from the top and working down secure each of the boards to the rafters and the stepped rafter using 2x25mm screws. The top, smallest board will only need 1x25mm screw for each end.

Table of Contents