Forest garden UPK02FP Assembly Instructions

Pergola 10'x 10'
Thank you for choosing this Pergola manufactured by the UK's largest manufacturer of timber garden products. In order
to gain the most benefit from it, please note the following:
- Exercise particular care and follow instructions.
- This Pergola is pressure treated to ensure the longevity of all timber components and protect against rot. This may leave
a colour difference on some parts that will even out as the moisture content stabilises.
- In line with your statutory rights, please check all parts prior to assembly, as assembly of damaged parts may be
deemed to be acceptance and this may affect the remedies you are entitled to. If the product is not constructed in
accordance with the instructions, or is altered in anyway (e.g. painted), the manufacturer cannot be held liable for any
resulting damage.
- This product will shrink and swell as a result of varying moisture content.
- Please keep all plastic bags and small parts away from children in order to reduce the risk of suffocation.
- Important Note : Do not lean or stand on rafters during assembly they are not load bearing.
- If there are any technical queries with the product, please contact our customer help line on 0333 7777 089 between the
hours of 8.30 am and 5.00 pm Monday to Friday.
2860mm
HAMMER
TAPE MEASURE
Forest Garden Ltd, Unit 288 Hartlebury Trading Estate, Hartlebury, Worcestershire, DY10 4JB
RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
2860mm
POZI DRIVE
SCREWDRIVER

Loose Components

UCBCBI Qty 8
'BRACE'
USU94BI Qty 4
'POST'
URCB12BI Qty 9
'RAFTER'
MUST PRE DRILL
DRILL
Issue 0214
UPK02FP
FIXING PACK
25mm screw qty 56
60mm screw qty 24
U'bracket qty 14
4
Important : Assembly of this
product requires a minimum
of two adults