Technical Specifications - Optimus IT-100 Operating Instructions Manual

Dtmf telephone interface
Table of Contents

Advertisement

6.3. CONFIGURATION EXAMPLE AND SENDING AN ANNOUNCEMENT
We will define the following configuration:
1
2
PASSWORD 123
CONFIGURATION
1. Press the CONFIG. button on the rear panel of the module. The CONFIG. LED will start to blink
quickly.
2. Dial the telephone number corresponding to the telephone interface. When the module answers, the
CONFIG. LED will remain lit and THREE DIFFERENT TONES will be heard.
3. Enter the ten digits (parameters) of the intended configuration (in this case 1 2 3 2 0 0 0 4 0 2).
4. THREE IDENTICAL TONES will be heard, confirming that programming has been completed correctly,
and then the telephone module hangs up automatically.
5. Hang up the telephone. The CONFIG. LED blinks slowly again, indicating that the system is now
configured.
N.B.: The user has approximately 25 seconds to make the call and send the configuration parameters.
SENDING AN ANNOUNCEMENT
1. To broadcast an announcement, pick up the telephone and call the number corresponding to the
telephone module.
2. After 2 call tones, the module answers and the CONFIG. LED stops blinking and remains lit.
3. After a series of consecutive identical tones, enter the three digits corresponding to the password (1,
2, 3).
4. A long tone will be heard. Speak after this tone. You have 30 seconds to broadcast the
announcement.
5. To end the announcement, hang up the telephone or press key 1.

7. TECHNICAL SPECIFICATIONS

Power supply
Consumption
Type of dialling
Weight
Dimensions
Rack units
Finishes
Accessories
IT-100 v1.2
IT-100
3
2
ANSWER
AFTER 2
CALL TONES
0
0
- - -
- - -
230 V AC 50/60 Hz
On standby: 15 mA (230V AC) 3.5 W
During a call: 20 mA (230V AC) 4.6 W
DTMF tones
1.9 kg
213 x 44 x 235 mm
1
Chassis: iron painted black RAL 9005
Cover: black skinplate
Z-113 Double mounting kit (0,33 Kg)
Z-112 Single mounting kit (0,4 Kg)
Z-111 DIN rail mounting kit (0,1 Kg)
Z-110 Wall mounting kit: (0,24 kg)
DTMF telephone interface
0
4
Detection of
NOISE GATE
- - -
hang-up
DEACTIVATED
tone
R+D Department
0
2
MAXIMUM
TIME 30 s.
10

Advertisement

Table of Contents
loading

Table of Contents