Table of Contents
Advertisement
Cleaning and care
Detergent solution pump
– Set the programme selector to Off, pull out the mains plug .
1. Open and remove the maintenance cover.
2. Carefully unscrew the pump cover - do not remove it completely.
3. Let the water drain into a shallow container (let the remainder drip
onto a floor cloth). Repeat the operation until there's no water left.
4. Remove the pump cover. Remove foreign material/fluff from inside the
pump.
5. Clean the interior, pump cover thread and pump housing
(fan impeller in the detergent solution pump must be able to rotate).
6. Refit the pump cover and screw on tightly.
7. Insert the maintenance cover and close it.
To prevent unused detergent from flowing into the outlet during the next
wash: pour 1 litre of water into dispenser II and start the Single Spin
programme.
Filter in the water inlet hose
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except Single Spin).
3. Select Start/Soak. Leave programme running for approx. 40 seconds.
4. Set the programme selector to Off. Pull out the mains plug.
Clean the filter:
1. Remove the hose from the tap.
Clean the filter with a small brush.
or
Remove the hose from the rear of the appliance.
Remove filter with pliers and clean.
2. Reconnect the hose and check for leaks.
– Risk of scalding! Allow detergent
solution to cool down!
– Turn off the tap!
1
2
2
1
9
Consumption values
Variants
WM08X0R00W
Energy efficiency grade
Electricity consumption
Water consumption
Rate of washing ability
Noise value
Spining noise value
Washing noise value
Energy consumption tested under standard programme Super Clean with additional option
Intensive according to GB standard.
Technical specifications
c
b
a
Customer service
Before calling the customer service, please check whether you can eliminate the fault yourself
page 11 What to do if...
If yor require advice, even during the warranty period, you will incur the costs for the call-out
of a technician.
When calling customer service, please give the detailed of your address, telephone number,
fault description, purchase date, product number (E-Nr.) and the production number (FD) of
the appliance to prevent unnecessary call-outs. This will save your additional costs.
E-Nr .
FD
Universal customer service number in China: 4008899999
Free consultation hotline: 8008289828
2
0.60
45
1.03
68dB(A)
54dB(A)
WM series: a = 600 mm
b =560 mm
c = 850 mm
WS series: a = 600 mm
b = 400 mm
c = 850 mm
net weight: 60 kg
These numbers are shown on the rating
plate which can be found on the frame of
the open door and also on the rear of the
appliance.
10
Advertisement
Table of Contents
