Table of Contents
Advertisement
and the PC. These data are the 2 kinds of locations: Users data (which are manually entered by the
users) and System data (which are provided by QUINTEZZ).
A maximum of 7,500 system locations and 500 user locations can be entered in the QUINTEZZ.
When saving new system data, the old system data are deleted.
B.
CONNECTING THE QUINTEZZ TO THE PC
•
The QUINTEZZ is supplied with an adapter and a data cable.
•
The adapter is to be inserted into a socket and is to be connected with the POWER port of
the QUINTEZZ.
•
The data cable is to be connected with the PC port of the QUINTEZZ and the serial port of the
PC (COM 1 or COM 2 or COM A or COM B or |0|0|).
•
In order to set the QUINTEZZ for PC operation, you have to press the QUINTEZZ 'Setting'
button (after switch-on) for 6 seconds, until a ringing signal is heard.
•
On the QUINTEZZ display, three zeros will slowly blink.
C.
INSTALLING THE SOFTWARE
The supplied CD-ROM contains the SETUP programme. By means of this programme, the PC
software is installed. This software is tested with the operating systems as indicated on the CD.
It is impossible to test the QUINTEZZ software combination with all the present and future
programmes. That is why it is excluded from any guarantee.
When starting the SETUP programme, the following display will appear:
The display indicates that any other applications are to be switched off. As soon as this is done,
you click OK and the following display will appear:
The installation programme will recommend a location to install the programme. When you agree,
you press the big square button picturing a PC with a box.
After that, the following appears:
Q u i n t e z z
5
English
Advertisement
Table of Contents
