Bissell CROSSWAVE CORDLESS 2551 Series Quick Start Manual

QUICK START GUIDE
CROSSWAVE
Quick Start Usage Instructions
1 2
click
Place your CrossWave
Cordless onto the 3-in-1
First, insert the handle
Docking Station to charge.
at the top of the body For maximum run time,
of the machine until charge unit for 4 hours
you hear a "click". prior to use.
4
On the back of the machine,
align Clean Water Tank with
the grooves and slide tank into
place until you hear a "click".
162-0023 02/19 RevA
3
4h
Small Area Cleaning
For small area cleaning (less than 350 sq ft), fill the
Clean Water Tank with warm tap water to the first water
fill line. Then add formula to the first formula fill line.
5
HARD FLOOR RUG BUTTON
BUTTON
Turn machine ON by selecting the type of
floor you will be cleaning. For hard floors,
choose the HARD FLOOR button and for area
rugs push the RUG button.
CORDLESS
®
for complete instructions and important safety notices.
Large Area Cleaning
For large area cleaning (up to 700 sq ft), fill the Clean
Water Tank with warm tap water to the second water
fill line. Then add formula until you get to the second
formula fill line. Screw the cap back onto the Clean
Water Tank.
6
2551 SERIES
WARNING
Refer to the enclosed user guide
Each time you use the product, hold
the solution trigger for 10 seconds
to prime the system with cleaning
solution before you begin cleaning.
When you hold the trigger, LED
lights will illuminate.
When solution is flowing, you will see
bubbles forming at the edges of the
brush roll window.
You are ready to start cleaning with
your BISSELL CrossWave Cordless!