Chapter 3: Precision Compact Dual Vesa Sleeve Mount - Dell Precision 3240 Compact Accessories Installation Manual

Precision Compact Dual VESA sleeve mount
For flexible installation, you can use the Precision Compact Dual VESA sleeve mount to secure the Precision 3240 Compact
system on a VESA compatible single or dual monitor arms.
Precision compact dual VESA Sleeve mount supports the following monitor arms:
● Dell Dual Monitor Arm - MDA20
● Dell Single Monitor Arm - MSA20
NOTE: The Precision Compact dual VESA sleeve mount supports up to 68.58 cm (27 in.) monitor.
NOTE: To avoid monitor tilt down, user can tighten the hinge screw of arm to keep monitor stand in comfortable angle.
1. Follow the instructions in
2.
CAUTION: To avoid any damage to the monitor, ensure that you place the monitor on a protective sheet.
Place the monitor on a soft cloth or cushion near the edge of desk so the base of the stand extends past the edge of the
desk.
3. Place the VESA sleeve mount on the back of the monitor.
NOTE: Ensure that the side with the ∆ (triangle icon) on the mount is facing up.
4. Use the four M4x10 screws to secure the VESA sleeve mount to the back of the monitor.
NOTE: Insert the screw driver through the square holes on the VESA sleeve mount to fix the screws behind the
monitor.
Before you begin.
Precision Compact Dual VESA sleeve mount
3
7