Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Energotech EnergoControl T60 Series
Summary of Contents for Energotech EnergoControl T60 Series
- Page 1 EnergoControl Touchscreen Thermostat - T60 Series User Guide version 2.86et...
-
Page 3: Table Of Contents
Table of Contents LCD Main Display ..........Overview ............. Getting Started - General ........Mode Selection ........... Startup Wizard - Wi-Fi ......... Mode 1 - Thermostat Mode Home/Away Mode ..........Optimum Start / Adaptive Start ......Air Humidity ............Hold Mode (Timer Function) ......Holiday Mode ............. -
Page 4: Lcd Main Display
LCD Main Display... -
Page 5: Overview
Overview Wi-Fi indicator - Displayed when connected to a Wi-Fi network (T60-EW/SW only). Hold: Temperature Hold / Timer Function. Adjusting the optional settings. Day Indicator and Clock. Home/Away: Allows a preset set-back temperature while away from the premises. OPT (Optimum): Displayed ON/OFF of the “Adaptive/Optimum Start”. Air Humidity: - If humidity value less than 30%, the pointer will be in the Red area - If humidity value is between 30% and 60%, the pointer will be in the Green area... -
Page 6: Getting Started - General
Getting Started - General When the thermostat has been installed and powered on for the first time, you must set the Language, Time Zone, Date/Time and the Daylight Saving Time. Whenever the use of the icons is mentioned in this user guide, you can also swipe navigate on the main display. -
Page 7: Startup Wizard - Wi-Fi
Startup Wizard - Wi-Fi This page applies only if you have purchased the Wi-Fi version, T60-EW or SW, of the thermostat Use only the 2.4GHz band, if you have a selectable dual-band router. Download and install the free T60 App MyComfort House on your smart device, via App Store or Google Play Store. -
Page 8: Mode 1 - Thermostat Mode
MODE 1 - THERMOSTAT MODE / Operation of Main Display Home/Away Mode The Home/Away Mode is a shortcut button to easily change to a preset temperature when leaving the premises. The range is +7°C to +35°C, default is +7°C. In Away Mode, the thermostat will only turn the heating ON, if/when the room tem- perature drops below the set Away temperature. -
Page 9: Holiday Mode
Press the button “Hold”. Press the first column of “Hold Temp”, use the icons to set the desired hold temperature. The temperature range is +5°C to +45°C. Press the second/third columns of Hours/Minutes, use the icons to set the desired hold time. Press the icon to save and return to main display, or press the “Cancel ”to delete the setting. - Page 10 Press the “Schedule” again on the main display and enter the setting interface. On the edit page, Monday to Sunday can now be selected. Press “Monday” and select a time period: Morning / Day / Evening / Night. Each time period has options, On/Off.
-
Page 11: Feature Settings
Feature Settings Language Press the icon Feature Settings. Browse to the “Language” submenu and press Select your desired language. Press the icon twice to save and return to main display. Time Zone Selection Press the icon Feature Settings. Browse to the “Time Zone Selection” submenu and press Select the time zone you desire. -
Page 12: Backlight Setting
Backlight Setting Press the icon Feature Settings. Browse to the “Backlight” submenu and press Use the icons to adjust to the desired brightness. Ambient Light Dimming: When this function is enabled, the light sensor will detect when to dim the back-light if the ambient light levels drop. If you turn the room lights off, the back-light will dim so the T60 does not light up the room. -
Page 13: Network Setting
Option Inactive PIN code Option Active PIN code For example, set your personal pin code to 5209 Press the first column, use the icons to set to Press the second column, use the icons to set to Press the third column, use the icons to set to Press the fourth column, use the icons to set to... -
Page 14: Temperature Format
Temperature Format Press the icon Feature Settings. Browse to the “Temp Format” submenu and press There are two options °C / °F. Celsius / Fahrenheit. Press the icon in the front of °C °F and it will turn to Press the icon twice to save and return to main display. -
Page 15: Output Delay
system defaults to 0.5°C, meaning that when the temperature is set to 20°C, the heating will start at 19.5°C and stop at 20°C. If the value is set to 1°C, the heating will start at 19°C and stop at 20°C. The switching differential is settable between 0.5°C - 3.0°C . -
Page 16: Sensor Selection And Calibration
Note: The Remote Air Sensor must not be used for controlling electric underfloor heat- ing. Only designated floor sensors or both (Remote Air & Floor Sensor) should be used. If the optional air- or floor sensor is not supplied by Energotech, an 10 kΩ sensor must be used together with the thermostat. -
Page 17: Humidity Sensor - Calibration
Humidity Sensor - Calibration This option allows you to calibrate the humidity sensor. You should only calibrate the sensor if the reading differs from the actual air humidity. You can calibrate the sensor with ± 30% in steps of 1% in the following way: Press the icon Feature Settings. -
Page 18: Optimum Start / Adaptive Start
Press the icon twice to save and return to main display. Optimum Start / Adaptive Start The function is selected in the main display. Daylight Saving Time (DST) Press the icon Feature Settings. Browse to the “Daylight Saving Time DST” submenu and press Press the icon to enable or disable the function. -
Page 19: System Information
System Information Press the icon Feature Settings. Browse to the “System Information” submenu and press The version number and ID number could come in handy in case of a warranty. Press the icon to exit. Reset To Factory Settings Press the icon Feature Settings. -
Page 20: Mode 2 - Time Clock
MODE 2 - TIME CLOCK Setting the Time Clock To program the time clock times, follow these steps: Press the button “Schedule” on the main display. Press on Weekday or Weekend Four time periods, Morning / Day / Evening / Night, can be selected to set. Each period has the options ON/OFF. - Page 21 Press the ‘Hours’ column and use the icons to set the desired Boost time. Press the ‘Minutes’ column and use the icons to set the desired Boost time. Press the icon to save and return to the main screen. The indication “Boost On Left **:**”...
-
Page 23: Technical Specification
Operating voltage / Power supply 85-230VAC, 50/60Hz Standby power < 1.0W Rated Current / Relay 16A resistive load, 230V Setting range, temperature 5-45°C Floor limitation, temperature range 20-45°C On/Off differential ±0.5°C Humidity sensor, air 0-100% Three programming modes: Weekday/Weekend (5 + 2) - edit/set 4 time periods per day Seven day programming (7) - edit/set 4 time periods per day... - Page 24 Energotech AB Firmagatan 5 SE-213 76 Malmö, Sweden Tel: +46 40 866 90 info@energotech.se www.energotech.com For latest updated information please visit our website...
Need help?
Do you have a question about the EnergoControl T60 Series and is the answer not in the manual?
Questions and answers