Assembling Your Blender; Using Your Blender - West Bend L5700 Instruction Manual

Caution: Follow these important steps to assemble, tighten and mount blending jar
quickly and correctly. Injury may result if moving blades are accidentally exposed.
Unplug appliance from electrical outlet before assembling, removing, or cleaning.
Never place motor or cord in water or other liquids.
1. Turn jar upside down so the small, bottom
opening is facing you.
2. Put the seal ring on the outer rim of the blade
base.
3. Thread blade base to jar.
4. Place assembled blending jar onto motor base
with handle on the right. Be sure bottom of
attached blade base assembly is sitting flat on
the motor base. Turn clockwise to lock in place.
5. Place lid on top of blending jar; turn clockwise
to lock in place. Insert stir stick, or place lid cap
in center of lid and turn clockwise to lock in
place.
6. Your Studio Blender is now ready for use.
1. Make sure blender is unplugged. Place blender motor base on clean dry
surface.
2. Place the blending jar onto the motor base and turn counter-clockwise to lock
into place.
3. Add ingredients to the blending jar and replace the lid. Lock lid in place by
turning clockwise.
4. Before starting, insert the stir stick or lid cap in center of lid. Place hand on the
stir stick knob or rest it on jar cover when starting and running motor.
using the stir stick turn the stir stick counter-clockwise to thoroughly mix the
ingredients.
5. You may add more ingredients through the hole in the center of the lid. When
finished adding ingredients, cover the hole with the lid cap, and then plug cord
into outlet.
6. Always operate blender on a clean, dry surface to prevent air from carrying
foreign material or water into the motor.
A
SSEMBLING
U Y
SING OUR
Y B
OUR LENDER
B
LENDER
5
When