Table of Contents
Advertisement
Technical specifications
Notice! Failure to follow specifications and local regulations may cause equipment damage. Misapplication will void
warranty.
Power supply
Power requirements
Power consumption
Electrical connection
Clock backup
Signal inputs
Temperature inputs
Range
Accuracy
Input type:
Range
Accuracy
Signal outputs
Digital switching outputs
Switching type
AC switching power
Insulation strength
between relays contacts and system electronics:
between open relays contacts
Environment
Operation
Climatic conditions
Temperature
Humidity
Transport & storage
Climatic conditions
Temperature
Humidity
Mechanical conditions
Standards
Product standards
Automatic electrical controls for household and similar use
Special requirement on temperature dependent controls
Electromagnetic compatibility for
domestic sector
Degree of protection
Pollution class
Safety class
Overvoltage category
Restriction of the use of certain hazardous substances
General
Dimensions (H x W x D)
Material:
Weight (including package)
Dimensions, mm (inch)
88 (3.5)
Doc: 70-00-0660, V1.1, Date: 20170322
Subject to alteration
conformity
RoHS directive
EMC directive
Low voltage directive
Front:
Power case:
Cover, back part
Mounting plate
32 (1.2)
© Vector Controls GmbH, Switzerland
210 – 250 V AC 50/60 Hz
Max 1W, 1.5VA
Terminal connectors
Min 48h if charged for 24h
RT internal
0...50 °C (32...122 °F)
0.5°C (1°F)
External (Sxx-Tn10 sensor)
-40..70°C (-40...158°F)
0.5°C (1°F) if 0...50°C (32....122°F)
1.0°C (2°F) if -40...70°C (-40...158°F)
Y1 to Y2
Relays
0...250V AC 1.25A max. each output
4000VAC
1000VAC
To IEC 721-3-3
class 3 K5
0...50 °C (32...122 °F)
<95 % r.H. non-condensing
To IEC 721-3-2 and IEC 721-3-1
class 3 K3 and class 1 K3
-25...70 °C (-13...158 °F)
<95 % r.H. non-condensing
class 2M2
2011/65/EU
2004/108/EC
2006/95/EC
EN 60 730 –1:2011
EN 60 730 – 2 – 9:2010
Emissions: EN 60 730-1:2011
Immunity: EN 60 730-1:2011
IP30 to EN 60 529
II (EN 60 730-1:2011)
II (IEC61140:2001+ A1:2004)
III (EN 60 730-1:2011)
EN 50581:2012
21 x 88 x 88mm (0.8 x 3.5 x 3.5 in.)
60 x 50 x 32mm (2.4 x 2.0 x 1.3 in.)
ABS plastic (UL94 class V-0)
Galvanized steel
Standard:
Deluxe (-D):
21
Space required in flush mounting box:
(0.8)
(H x W x D)
60 x 50 x 32 mm (2.4 x 2.0 x 1.26 in.)
Distance for mounting screws:
Horizontal and vertical:
45 to 63 mm (1.8 to 2.5 in.)
TLC3-ECO Economizer
O
PERATION
295g (10.4oz)
305g (10.7oz)
Page 2
Advertisement
Table of Contents
