Download Print this page

Celina KIT-ETS040X040X7' Instructions

40’ x 40’ ets frame tent

Advertisement

Quick Links

40' x 40' ETS FRAME TENT INSTRUCTIONS
www.GetTent.com/instructions.htm
Page 1 of 4

Advertisement

loading

Summary of Contents for Celina KIT-ETS040X040X7'

  • Page 1 40’ x 40’ ETS FRAME TENT INSTRUCTIONS www.GetTent.com/instructions.htm Page 1 of 4...
  • Page 2 40’ x 40’ ETS FRAME TENT INSTRUCTIONS 1. A minimum of 4 people and 3 frame tent jacks are recommended for the proper installation of this tent. Refer to the parts list at the top of the diagram to make sure you received all parts required for proper installation of this tent. 2.
  • Page 3 CAUTION: Dragging, pulling, or sliding the vinyl tent top across the ground, frame, or any other type of surface may cause pin holes in the vinyl top. Celina does not warrant pin hole damage to the vinyl products.
  • Page 4 Once at the end, take the long lace and loop it up under the last two laces and tie it back up to the 4th lace from the bottom. Tie a knot to hold it into place. If you have any questions, please contact Celina Tents support department at: support@celinatent.com...

This manual is also suitable for:

Ets