Advertisement
Diagram 3 – thermostatic valve with 3 way diverter
Trim Installation
a. Screw Temperature Control Dome (6) and Volume Control Dome (7) onto valve.
o Please note that the Temperature Control Dome (6) has a larger opening than the Volume
Control Dome (7).
b. Secure the Thermostatic Face Plate (1) onto the valve by sliding over the Temperature Control
Dome (6) and Volume Control Dome (7)
c. Screw Dome Sleeve (13) onto Temperature Control Dome (6) and Volume Control Dome (7).
d. Lock the Thermostatic Face Plate (1) securely against the wall using the Thermostatic Face Plate
Lock Ring (2).
e. Ensure Temperature Stop ring is installed with red dot at 12 o'clock position, and thermostatic
handle is installed with push button at 12 o'clock position.
Thermostatic Shower Trim w/ Built-in
Volume Control/ Diverter
Thermostatic Shower with Built-in
Volume Control/ Diverter
Sample Setup
P a g e
| 3
Advertisement
