Related Manuals for Sunrich Tech CP-140
Summary of Contents for Sunrich Tech CP-140
- Page 1 Powered RS-232 2-Port PCIe Card User Manual Ver. 1.00 All brand names and trademarks are properties of their respective owners.
-
Page 2: Table Of Contents
Contents: Chapter 1: Introduction ............3 1.1 Product Introduction ............ 3 1.2 Features ................ 4 1.3 System Requirements ..........5 1.4 Package Contents ............5 Chapter 2: Getting Started ..........6 2.1 Hardware Installation ..........6 2.2 Pin Assignment ............7 2.3 Jumper Settings............ -
Page 3: Chapter 1: Introduction
Chapter 1: Introduction 1.1 Product Introduction RS-232 I/O series, a line of PCI Express Multi-port Serial Communication Board, is designed to meet PCI Express Base Specification Ver2.0. It can be installed in virtually any available PC system and compatible with all major operating systems. Users do not need to manually set jumpers to configure I/O addresses and IRQ locations. -
Page 4: Features
1.2 Features ⚫ PCIe 2.0 Gen 1 compliant ⚫ Supports x1, x2, x4, x8, x16 (lane) PCI Express Bus connector keys ⚫ Expands independent RS-232 serial ports with communications speeds up to 230Kbps ⚫ With highly reliable Exar native PCI Express 16550 UART controller ⚫... -
Page 5: System Requirements
1.3 System Requirements ⚫ Windows® XP/Vista/7/8/8.1/10 (32/64 bit), Linux 2.6.31 or later ⚫ One available PCI Express x1, x4, x8 or x16 slot 1.4 Package Contents ⚫ 1 x Powered RS-232 2-Port PCIe Card ⚫ 1 x User Manual ⚫ 1 x Fan Out Cable ⚫... -
Page 6: Chapter 2: Getting Started
Chapter 2: Getting Started 2.1 Hardware Installation Turn off the power to your computer. Unplug the power cord and remove your computer’s cover. Remove the slot bracket from an available PCIe slot. To install the card, carefully align the card’s bus connector with the selected PCIe slot on the motherboard. -
Page 7: Pin Assignment
Note: If system’s power supply cannot provide the efficient power to serial devices, it will cause your PC system unstable or unexpected reboot. 2.2 Pin Assignment The 2-ports RS-232 PCIe Card has a female DB44 connector on the board. In this section, we give the on-board connector’s pin assignments to facilitate making your own connection cable, and the male DB9 device-side pin assignments for the fan out cable. - Page 8 Female DB44: Board-side Pin Assignments: Serial Port 1 Serial Port 2 MN2000000225 Page 8...
-
Page 9: Jumper Settings
2.3 Jumper Settings This powered RS-232 board supports DC power output to device feature. You can select +5V or +12VDC power output to serial device over DB and 9 pin. Please follow the jumper settings before using each COM port. CAUTION Be sure to confirm your serial device power voltage sourcing and pin number to prevent any further problem. - Page 10 You can read below silkscreen print on the PCB. Each COM port has four jumper settings for the 1/4/8/9 pin for DB9 male connector. You can select standard RS-232 signal (system default), +5VDC, or +12VDC power output on the assigned pin. Serial Port 1 –...
- Page 11 Serial Port 2 – 1 Normal(DCD) Serial Port 2 – 4 Normal(DTR) Serial Port 2 – 8 Normal(CTS) Serial Port 2 – 9 Normal(RI) Note: System default setting is normal mode, standard RS-232 pin MN2000000225 Page 11...
-
Page 12: Driver Installation
define. No described pins mean standard RS-232 definition. 2.4 Driver Installation 2.4.1 Installation for Windows Login URL http://www.sunrichtech.com.hk/ Search IE-K10-5120, download driver Follow the prompts to install the driver 2.4.2 Installation for Linux Login URL http://www.sunrichtech.com.hk/ Search IE-K10-5120, download driver Extract the compressed driver source file to a certain directory by the following # unzip xr17v25x_35x-lnx3.x.x-pak.zip... - Page 13 the current directory. Then executing the following command to activate the module driver: # insmod xr17v35x.ko MN2000000225 Page 13...
Need help?
Do you have a question about the CP-140 and is the answer not in the manual?
Questions and answers