Related Manuals for Sunrich Tech N-580
Summary of Contents for Sunrich Tech N-580
- Page 1 PCIe 4 Ports Gigabit Ethernet NIC PCIe Card User Manual Ver. 1.00 All brand names and trademarks are properties of their respective owners.
-
Page 2: Table Of Contents
Contents: Chapter 1: Introduction ............3 1.1 Product Introduction ............ 3 1.2 Features ................ 4 1.3 System Requirements ..........4 1.4 Package Contents ............5 Chapter 2: Getting Started ..........5 2.1 Hardware Installation ..........5 2.2 Driver Installation for Windows ........6 2.3 Driver Installation for Linux ........ -
Page 3: Chapter 1: Introduction
Chapter 1: Introduction 1.1 Product Introduction PCI Express is the next revolution in I/O interconnect standards that will deliver the bandwidth and features required by PCs, consumer electronics and communications devices. The architecture is a cost-effective, low-pin count, and point-to-point technologies offering maximum bandwidth, reducing cost and design complexity and enabling smaller form factors. -
Page 4: Features
1.2 Features Four 10/100/1000Mbps compatible RJ-45 Ethernet ports Four-lane (or x4) PCI Express compatible with x4, x8 and x16 PCI Express slots Fully Compliant with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab Supports 10/100/1000M data auto-negotiation Teaming support ... -
Page 5: Package Contents
1.4 Package Contents 1 x 4-Port Gigabit Ethernet NIC PCIe card 1 x Driver CD 1 x User Manual Chapter 2: Getting Started 2.1 Hardware Installation Turn off the power to your computer. Unplug the power cord and remove your computer’s cover. Remove the slot bracket from an available PCIe slot. -
Page 6: Driver Installation For Windows
2.2 Driver Installation for Windows The following section shows you how to install 4-Port Gigabit Ethernet PCIe Card driver on Windows operating systems. Insert the provided CD into your disk drive. The CD-ROM will start automatically. The following screen will show up and please click “Install Driver”. -
Page 7: Driver Installation For Linux
Follow the instructions on screen to install the driver. 2.3 Driver Installation for Linux Insert the provided CD into your CD-ROM drive. Extract the compressed driver source file to a certain directory by the following command: (Please copy the driver file “igb-5.3.5.18.tar.gz”... -
Page 8: Verifying For Linux
Panel. Start > Control Panel > Device Manager Entry “Network adapters” item, and you can read “Intel(R) I350 Gigabit Network Connection” in the Device Manager. 2.4.2 Verifying for Linux You can check whether the driver is loading by using following commands: MN5000000072 Page 8... -
Page 9: Chapter 3: Troubleshooting Tips
# lsmod | grep igb # ifconfig –a If there is a device name, ethX, shown on the monitor, the linux driver is load. Then, you can use the following command to activate the ethX. # ifconfig ethX up, where X=0,1,2,… Chapter 3: Troubleshooting Tips ... - Page 10 Please upgrade your motherboard BIOS to the latest version. If it still not work, contact your motherboard vendor asking the advanced supporting for BIOS updated. The board itself might be defective. You can try another motherboard testing PCIe Dual Port Gigabit Server Adapter working or not.
Need help?
Do you have a question about the N-580 and is the answer not in the manual?
Questions and answers