Weslo WLTL21280 User Manual page 9

*WLTL21280-146358 5/4/00 11:24 AM
the walking belt, slide the speed control to the
"SPEED RESET" position.
Press the MODE button to select the desired
4
monitor mode.
The monitor offers
five different modes
to provide instant
exercise feedback:
¥ SPEEDÑdisplays
your speed, in
miles per hour.
¥ TIMEÑdisplays the elapsed time.
¥ DISTANCEÑdisplays the distance that you have
walked or run, in miles.
¥ CALORIEÑdisplays the approximate number of
Calories you have burned. Note: The actual num-
ber of Calories you have burned may differ slightly
from the number displayed if the speed is near the
lowest or highest setting.
¥ SCANÑdisplays the SPEED, TIME, DISTANCE,
and CALORIES modes, for five seconds each, in
a repeating cycle.
When the power is turned on, the SCAN mode will
automatically be selected. One mode indicator (see
the drawing above), will appear by the word SCAN,
and a second mode indicator will show which mode
is currently displayed.
Page 9
Mode
Indicators
If desired, the SPEED, TIME, DISTANCE or CALO-
RIE mode can be continuously displayed. Press the
MODE button repeatedly until the mode indicator by
the word SCAN disappears, and a mode indicator
appears by the name of the desired mode.
Note: The monitor display can be reset by pressing
the ON/OFF button twice.
When you are finished, stop the walking belt
5
and remove the key.
Slide the speed
control to the
ÒSPEED RESETÓ
position, and
remove the key.
Store the key in a
secure location.
Press the ON/OFF button.
6
To turn off the dis-
play, press the
ON/OFF button.
Note: If the walk-
ing belt is stopped
and the console
buttons are not
pressed for 3 to 6
minutes, the display will turn off automatically.