Table of Contents
Advertisement
When connected to the G-router the user admin enters the menu based configuration screen.
The following is an example of the starting page for the G-router CLI:
Figure 4: G-router CLI for user 'admin'
You can navigate the various configuration elements by using the arrow keys:
Use up and down arrow to select objects
•
Use enter or space to fold open
•
Use right arrow to change focus
•
4.2
Logging out (CLI)
Before going further you should know how to log out of the system. By pressing 'q' in the G-
router CLI you are automatically logged out.
4.3
Changing your password (CLI)
The G-router ships with the default password rfi123. It is advisable to change this password
when the system is installed. The password for the various users can be changed through the
'Users' tab on the main menu bar on the left of the CLI.
Go down to the Users -> Groups -> Administrator Users -> Users -> 1 with your arrow keys.
Press the right arrow to navigate to the Password field. Here you can change the password.
After making configuration settings to the unit you have to reboot to activate the changes.
The information contained in this document is subject to change. This document contains proprietary information, which is protected by copyright
laws. All rights are reserved. No part of this document may be photocopied, reproduced or translated to another language or program language
without prior written consent of RFI Engineering B.V.
Page: 12(21)
Advertisement
Table of Contents
