Technical Support; Firmware Version; Firmware Updates; Resetting The Unit - Geist Watchdog 15 Series Instruction Manual

Technical Support

Firmware Version

The firmware version is located in the upper right section of the web interface header, represented
by v1.y.xx. Before contacting support, it is recommended that the Watchdog 15 unit first be
updated to the latest firmware version.
firmware version number available when contacting technical support.

Figure 20: Web Page Header

Firmware Updates

Keep your unit updated with the latest firmware releases or sign up for notifications at the following
website: http://geistglobal.com/support/monitor/firmware.

Resetting the Unit

Should the Watchdog 15 unit loose communication; the processor may be manually rebooted by
removing power momentarily from the unit. To restore the default IP address, press the reset
button located beside the network connector and hold for approximately 20 seconds. Both the idle
and activity lights near the network connector will both light up when the IP address has been reset.

Service and Maintenance

No service or maintenance is required. Do not attempt to open the unit or you may void the
warranty. No serviceable parts inside.

More Technical Support

http://www.geistglobal.com
(800) 432-3219
Email: support@geistglobal.com
Or contact your distributor.
GM1137
If this is not possible, please have the unit's existing
22 Revision Date: 02/13/2015