Monthly Checks - ROTOTILT S30/150 Manual

Service
IMPORTANT
!
must be carried out by an authorized service workshop. Contact
your supplier for information on service providers.
WARNING!
!
During service, maintenance or other work on the grapple,
disconnect the power and all the hydraulic hoses connected to
the base machine. Risk of personal injury; exercise caution!
IMPORTANT
!
must be removed from operation until inspection and any
necessary action is taken.
WARNING!
!
Take care of the environment. Use a drip pan to avoid harming
the environment.
IMPORTANT
!
and snow. This is especially important at temperatures below
freezing. Frozen materials may cause damage to piston rods,
connections and other quick coupler components.
WARNING!
!
Faults detected during inspections must be remedied right away
so as not to impair tiltrotator function and reliability.
Grease every 40 h
© Rototilt Group AB
– More extensive adjustments and repairs
– If the tool is subjected to external damage it
– As necessary, hose or wipe away sand, ice
Spare parts
Order spare parts through your dealer.
Always mention the type of quick coupler
and the tiltrotator manufacturing number
as stated on the information plate.
Only use original spare parts from Rototilt
Group AB. Rototilt Group AB assumes no
liability for the product if other spare parts
are used.
Consumable items
Regarding assembly paste, grease and
hydraulic oil, use the recommended
products.
Cleaning
Take care when cleaning. Avoid pressure
washers.
Use an oil drain pan when replacing
hydraulic oil. Hand in waste such as
hydraulic oil, hoses and similar for
recycling or destruction.
Daily checks
Carry out checks and service before and
after use.
Keep the warning decals fully legible.
Clean the quick coupler and its
attachment from dirt; in the winter clean
away snow and ice.
Clean the quick connect fittings in the
quick coupler.
Check that there are no oil leaks.

Monthly checks

Check that the quick coupler and tool are
intact.
Check that there is no play in the lock
wedge/lock pistons.
Greasing
The S30 quick coupler has a locking
device that must be greased every
40 hours or whenever necessary.
See illustration on left.
The rotor seals must be greased every
40 hours.
See Service in the instructions for use for
the tiltrotator concerned.
2200006_ EN _7434 2018-08-31 English