Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for BraunAbility SYS01
Summary of Contents for BraunAbility SYS01
- Page 1 SYS01, SYS02 & SYS03 User Manual Instructions for fitting and use...
- Page 2 If you have any questions about your equipment, please contact Once again, thank you for placing your confidence in our products! Safe vehicle adaptation solutions For your safety BraunAbility products are designed and tested according to current directives and standards.
- Page 3 SYS01, SYS02, SYS03 Safety information Limitations of use General guidance Before using the wheelchair & occupant restraint systems Fit and use Fitting the wheelchair and occupant restraint systems 10-15 Front tie-downs Rear tie-downs Occupant restraints for SYS03 After care Equipment storage and maintenance Warranty “Declaration of conformity”...
-
Page 4: Safety Information
SYS01, SYS02, SYS03 Safety information Limitation of use The development of BraunAbility kits is a continuous process. Applications are added on a regular basis. For more details contact BraunAbility or look on the BraunAbility website. - Page 5 SYS01, SYS02, SYS03 SYS01 SYS02 SYS03...
-
Page 6: General Guidance
SYS01, SYS02, SYS03 General guidance • Wheelchair Accessories that have not been approved by the Wheelchair Manufacturer must be removed from the wheelchair and secured in the vehicle during transport to reduce the potential for injury. Refer to ‘Instructions For Use in Transport’ provided with the wheelchair or contact wheelchair manufacturer for further guidance. - Page 7 • The equipment has been tested in a configuration similar to that recommended by BraunAbility, and any deviation from the recommendations here is the responsibility of the installer/user.
- Page 8 SYS01, SYS02, SYS03 Before using the wheelchair & occupant restraint systems • Ensure that the wheelchair is correctly maintained and that the settings of any adjustable parts are made according to ‘Instructions for Use in Transport’. • Whenever possible remove any items of luggage etc that may be attached to the wheelchair and secure or store separately during transport in order to reduce the potential for injury to other passengers travelling in the vehicle.
- Page 9 SYS01, SYS02, SYS03 • Wheelchair users, their carers and family are advised to check vehicle specifications to ensure that sufficient floor space is available to accommodate the wheelchair and tie-down system. These distances are based upon the desire to maintain clear zones for potential head excursions of occupants provided with both upper and lower torso restraints.
- Page 10 SYS01, SYS02, SYS03 Fit and use Using the wheelchair & occupant restraint systems Front tie-downs Removing the rear tie-down The rail will have been installed in the vehicle in accordance with our own and the vehicle converter’s instruction. Position the wheelchair within the vehicle IMPORTANT: First remove the rear as required.
- Page 11 SYS01, SYS02, SYS03 Figure 1 Figure 2 Figure 3 Figure 4...
- Page 12 SYS01, SYS02, SYS03 Fit and use Using the wheelchair & occupant restraint systems Rear Tie-downs Removing the rear tie-down Select rear webbing tie-down so that the karabiner gates face outboard from the wheelchair, (Fig 5). If using a tongue and buckle wheelchair attachment, Release the webbing tension either strap can be selected for either side.
- Page 13 SYS01, SYS02, SYS03 Figure 1 Figure 5 Figure 6 Figure 7 Figure 8...
- Page 14 Occupant restraints for SYS03 BraunAbility recommends the use of a 3 point occupant restraint system to provide greater protection in case of an impact. However we also recognise that some vehicle layout/designs or specific postural or medical conditions do not allow that style of seatbelts to be used easily.
- Page 15 SYS01, SYS02, SYS03 Figure 11 Figure 9 Figure 10 Figure 12...
- Page 16 SYS01, SYS02, SYS03 After care Equipment storage and maintenance • Store the restraint safely off the floor to avoid damage and ensure that it cannot become a projectile in an accident. This can be achieved by using wall mounted storage bag such as SLR111.
-
Page 17: Warranty
BraunAbility products when used in conjunction with such jointly tested systems. For further details on specific applications please contact the Sales Office. In other situations, using BraunAbility products, for which BraunAbility has not participated in a joint test program, a limited BraunAbility warranty will apply. -
Page 18: Declaration Of Conformity
ISO 10542:2012 Martock, Somerset, RESNA WC-4 2012 Section 18 TA12 6EY, UK R.107.06 2007/46/EC Phone: +44 1935 827 740 E-mail: info@braunability.eu www.braunability.eu BraunAbility, Martock, 29 May 2019 Declares that the product / SYS01, SYS02 & SYS03 Rob Butcher Director of Engineering... - Page 19 Accredited by URS as testing laboratory in accordance with ISO/IEC 17025:2005 Quality system certified in accordance with ISO 9001:2008 Illustrations, descriptions and specifications in the user manual are based on current product information. BraunAbility UK Ltd reserves the right to make alterations without previous notice. © 2019 BraunAbility UK Ltd...
- Page 20 BraunAbility UK Ltd Unwin House Phone: +44 1935 827 740 The Horseshoe, Coat Road E-mail: info@braunability.eu Martock, Somerset, TA12 6EY, www.braunability.eu...