Set Up - Wells-Gardner D9300 Series Service Manual

Wells-Gardner Electronics Corporation
5.

SET UP:

Setting up your monitor is easy. All you have to do is make a few simple connections and
adjustments. The procedure is as follows:
5.1 Start Up.
Your monitor starts up automatically when you insert the power plug to power source.
5-2. Single Cable Connection.
Connect the 15pin signal cable to the source and lock both screws to ensure that the
monitor is properly grounded.
D type 15pin connector:
PIN NO. DESCRIPTION
1
2 VIDEO GREEN
3
4
5
6 VIDEO RED GROUND
7 VIDEO GREEN GROUND
8 VIDEO BLUE GROUND
VIDEO RED
VIDEO BLUE
N.C.
N.C.
PIN NO. DESCRIPTION
9
10
11
12
13
14
15
6
N.C.
GROUND
N.C.
SDA
HOR-SYNC
VER-SYNC
SCL