Wells-Gardner D9300 Series Service Manual page 13

Wells-Gardner Electronics Corporation
L. RECALL.
When the "RECALL" key is pressed, all user's adjustment values are changed to the factory
values.
M. LANGUAGE.
The menu is available in four languages.
1. Press the "MODE" key and the Main-Menu OSD will appear as in the previous figure.
2. Search the "LANGUAGE" sub-menu using the "UP/DOWN" key on the Main-Menu OSD.
3. Select the "LANGUAGE" by pressing the "SEL" key. Then the Language sub-menu will
appear as in the following figure
4. Search any language using the "UP/DOWN" key.
5. Select a language by pressing the "SEL" key.
6. Press "MODE" key to finish and save the selected language.
Then the OSD will return to Main-Menu in the selected language.
Press the "MODE" key again to finish the adjustment then the OSD will disappear.
11