Getting Started - LeapFrog Busy Learning Bot Parents' Manual

GETTING STARTED

Battery Removal and Installation
1. Make sure the unit is turned Off.
2. Locate the battery cover on the bottom of the unit and use a
screwdriver to loosen the screw and open the battery cover.
3. Remove old batteries by pulling up on one end of each
battery.
4. Install 2 new AAA (AM-4/LR03) batteries following the
diagram inside the battery box. (The use of new alkaline
batteries is recommended for maximum performance).
5. Replace the battery cover and tighten the screw to secure.
4