Advertisement
Quick Links
Assembly Instructions
Fedora Pergola Kit
Thank you for purchasing a do-it-yourself pergola kit from Pergola Depot. We appreciate your
business, and we are here to help you in any way possible. Read these instructions before
beginning so you can get a feel for what you will be doing. If you take your time and follow these
instructions, you can do it!
If you are installing this kit on a concrete patio, we advise that you use a 4x4 Galvanized post
base on each post secured with ½" red head concrete anchors which can be purchased from us
or your local hardware store. You will need some additional tools for this. There are instructions
on how to install them included in this document, and you can watch a video on our website
under the help menu. If you have any questions we are only an email or phone call away.
Call or email us with any questions.
Pergola Depot
Call: 1-877-563-0002
Email: support@pergoladepot.com
www.pergoladepot.com
Advertisement
Related Manuals for Pergola Depot Fedora
Summary of Contents for Pergola Depot Fedora
- Page 1 Assembly Instructions Fedora Pergola Kit Thank you for purchasing a do-it-yourself pergola kit from Pergola Depot. We appreciate your business, and we are here to help you in any way possible. Read these instructions before beginning so you can get a feel for what you will be doing. If you take your time and follow these...
-
Page 2: Kit Components
Kit Components o 2x6 Beams (4 for standard size kits) o 2x6 Rafters (# depends upon kit size) o 4x4 Notched Posts (4 for standard size kits) o 2x4 Angle Braces (8 for standard size kits) o 2x2 Top Slats (# depends upon kit size) o Hardware Pack o Optional: Post Base Mounting Hardware;... -
Page 3: Installation Steps
Installation Steps Step 1- Remove the wrapping from the outside of the crate. Step 2- Lay out all parts next to where you will be installing the pergola. Step 3- Place one beam on the ground (with the x’s facing up) exactly where you would like the front of the pergola to stand. - Page 4 Step 10- Lay the four posts on the ground with the bottoms at the edge of each hole, and the tops facing away from each other. Like this: Step 11- Lay one beam down on the ground near the top of the posts. Slide the posts up and onto the beam between the lines on the beam where it says post.
- Page 5 Step 14- With one person on each side, tilt the assembly up and drop the posts into the postholes (or into the post bases if on concrete). Have one helper hold the assembly in place (for some of the larger size pergolas this step may require more help). Refill the holes around the posts with dirt or dry concrete.
-
Page 6: You're Done
Any feedback on how we can make our kits easier to install will be very helpful. Pictures are always welcome! Crafted with pride in the U.S.A! Pergola Depot Call: 1-877-563-0002 Email: support@pergoladepot.com www.pergoladepot.com...