Wells WM-TR Operation Manual page 16

Wells water -max wm-tr operation manual
Hide thumbs Also See for WM-TR:
Table of Contents

Advertisement

DELIMING INSTRUCTIONS (continued)
WAIT
10 MIN
SQUEEZE
REMOVE BOTTLE
WAIT
ON
OFF
ON
1 HOUR
OFF
UNTIL
TANK
IS
EMPTY
REMOVE TANK
REMOVE LID
4. Squeeze solution bottle and force deliming solution into
Water-Max™
Allow Water-Max to set for 10 MINUTES with solution bottle in
place.
5. Press BUTTON on quick-disconnect fitting to release solution
bottle. While pressing button, lift solution bottle straight up.
Unscrew dispenser cap from solution bottle.
Rinse solution bottle and retain for next deliming cycle.
6. Press power switch to ON. Water-Max™ will dispense water
and deliming solution into tank.
When Water-Max™ stops dispensing, press power switch to
OFF. Allow Water-Max™ to set for I HOUR with deliming
solution in tank.
After I hour, drain pitchers of water from tank until tank is
empty.
Pour all water and solution from tank into a sink or appropriate
container for disposal.
7. Remove tank from Water-Max™
Remove TANK COVER from tank. Rinse cover and dry. Store
tank cover for later use.
14

Advertisement

Table of Contents
loading

This manual is also suitable for:

Water-max

Table of Contents