SCS Sentinel SCS1 COMFORT+ Manual page 40

Query the zone number with
scheduled arm and disarm
Syntax:
58
+【01－04】
+【#】
Query type wireless defense
zone
Syntax:
60
+【00 －99】
+【#】
Query the type of wired zones
Syntax:
61
+【51－54】
+ 【#】
Query remote operation on/off
Syntax:
62
+【#】
Query phone number
for specific zone
Syntax:
63
+【00－99】
+【#】
Query for the setting of alarm
audible confirmation
Syntax:
11
+【#】
Query the setting of anti-
tampering of telephone line
Syntax:
13
+【#】
Query sound volume of siren
Syntax:
14
+【#】
EN ::: 40
For query the first to the fourth group scheduled arm and disarm.
press alarm panel query key of your keyboard, then blinking status led on
and then press 5801# for zones with the first group of zone, the alarm panel
LCD show "00-99" means 0-99 zone are with 1
For query the zone types of 00-99.
the alarm panel lcd show the name of type of zone, detail about zone
types can be referred to another section of manual, the word "on" or "oFF"
next to the zone type represents whether siren will sound upon alarming.
For query the zone type of 51-54.
example: press alarm panel query key of your keyboard, then blinking status
led on and then press 6151# to query 51 zone alarm type, show no means
short-circuit to alarm while show nc means open circuit to alarm.
to query if the remote operation is allowed, it should show either on or oFF.
To query the phone number assigned to zone 00-99 for alert.
example: press alarm panel query key of your keyboard, then blinking status
led on and then press 6301# for zone 1, the alarm panel lcd show 123456
means these 6 group of phone numbers are assigned to 01 zone.
For query whether the alarm will play audible confirmation upon receipt
of commands. it shows either on or oFF.
For query whether the anti-tampering of telephone line is set, it shows either
on or oFF.
Query for the volume level of siren, it shows between 00-99 representing the 00
as lowest and 99 as highest volume.
number group.
st