SCS Sentinel SCS1 COMFORT+ Manual page 36

Set Remote operation
on or off
Syntax:
【62】
+ 【0/1】
+ 【#】
Assign specific phone
number to certain zone
Syntax:
【63】
+ 【 00-99 Defense zone
begin the area code】
+ 【 00-99 Defense zone
ends area code】
+ 【 police group
number 123456】
+ 【#】
Set audible confirmation
from panel to on or off
Syntax:
【11】
+ 【0/1】
+ 【#】
Enable or disable the SMS
Messaging
Syntax:
【12】
+ 【0/1】
+ 【#】
Enable or disable of the
anti-tampering of telephone
cord
Syntax:
【13】
+ 【0/1】
+ 【#】
EN ::: 36
This enable or disable the remote operation of alarm panel using telephone.
System default is on.
example: turn off the remote setting function,
Method one:
# , and then press 620#, * then press # to exit Setup.
Method two:
after calling and connected to the panel from remote, press 620#
Method three:
Send SMS message 1234620#
System default is all 00-99 defense zone will make call from the first to sixth
group phone number upon alarming.
Example: user needs 00-10 to call the first, second, third set of numbers.
Method one:
# , and then press 630010123#
Example: users need to 11-20 zone alarm the fourth, the fifth and the sixth group
number.
Method one:
# , and then press631120456#
example: user want zone 21 call only the 5th group number.
Method one:
# , and then press6321215#.
Method two:
after calling and connected to the panel from remote, press 630010123#, then
press 631120456#, then press 6321215#.
Method three:
Send SMS message 1234630010123#, and 1234631120456#, and 12346321215#
Alarm panel will produce audible confirmation beep upon receipt of signal from
remote control. 1 is on, 0 is off, default is on.
Example: users need to disable the audible confirmation.
Method one:
# then press 110# , press the * then press # exit Setup
Method two:
after calling and connected to the panel from remote, press 110#
Method three:
Send SMS messages1234110#
1 is on and 0 is off. Default is on
example: the user will need to turn off the text messaging feature
Method one:
# then press 120# , press * then press # exit setup status
Method two:
after calling and connected to the panel from remote, press 120#
Method three:
Send SMS message 1234120#
Cut the phone cord will trigger the alert. 0 is off and 1 on, system defaults to
closed.
example: user need to enable anti-tampering of telephone cord feature
Method one:
press # then press 131#, * then press # to exit Setup
Method two:
after calling and connected to the panel from remote, press 131#
Method three:
Send SMS message 1234131#